홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1,2-Dichloroethane → Pentachlorofluorobenzene

HRID 736962
인쇄

반응식

HRID 736962 반응식
[F:1][C:2]1C=C[CH:5]=[CH:4][CH:3]=1.[Al+3].[Cl-:9].[Cl-:10].[Cl-:11].ClCl.O.[Cl:15][CH2:16][CH2:17][Cl:18]>>[Cl:15][C:16]1[C:2]([F:1])=[C:3]([Cl:9])[C:4]([Cl:10])=[C:5]([Cl:11])[C:17]=1[Cl:18]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 5

HCID 111,2-DichloroethaneHCID 962WaterHCID 10008FluorobenzeneHCID 24526ChlorineHCID 6451240Aluminum(III) Chloride

생성물 1

HCID 9441Pentachlorofluorobenzene

반응 조건

온도
25 °C

실험 절차

A solution of 144 g (1.5 mol) of fluorobenzene in 1080 ml of 1,2-dichloroethane was admixed with 10 g (0.075 mol) of powdered AlCl3, and 586 g of chlorine gas were then passed into the mixture at 5-15° C. The solution was then stirred at 25° C. for about 5 hours, then heated to 65° C. and 100 ml of water were subsequently added while stirring vigorously. At this temperature, the phases were separated and the organic phase was extracted with water. The solvent was distilled off and the residue was taken up in 1300 g of NMP. After gas-chromatographic analysis (GC), the yield was calculated as: 93.9% of pentachlorofluorobenzene, 4.9% of hexachlorobenzene and 1.1% of tetrachlorofluorobenzenes. The solution can directly be reacted further as described in example 6.

후처리

  1. customwere then passed into the mixture at 5-15° C
  2. temperatureheated to 65° C.
  3. stirringwhile stirring vigorously
  4. customAt this temperature, the phases were separated
  5. extractionthe organic phase was extracted with water
  6. distillationThe solvent was distilled off
  7. customThe solution can directly be reacted further

출처 및 근거

ORD 기록
ord-7daf14fb73924d3b973634c13427808d
출처 데이터셋
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07595426B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트