홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitrobenzene → Aniline

HRID 745864
인쇄

반응식

HRID 745864 반응식
[N+:1]([C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][CH:5]=1)([O-:3])=[O:2].[C]=O.[H][H]>[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[C-]#[O+].[Ru].[Ru].[Ru]>[NH2:1][C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][CH:5]=1.[N+:1]([C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][CH:5]=1)([O-:3])=[O:2]
참가 물질반응 조건실험 절차출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 7416NitrobenzeneHCID 178418361HCID 178418361, 화합물HCID 178418416HCID 178418416, 화합물2회

생성물 2

HCID 6115AnilineHCID 7416Nitrobenzene

시약·촉매·용매 1

HCID 6096991Triruthenium dodecacarbonyl촉매

반응 조건

온도
160 °C

실험 절차

12.3 g (0.100 mole nitrobenzene) in 75 ml of methanolic solution and 0.128 g Ru3 (CO)12 (600 microgram-atoms ruthenium) were placed in the reactor vessel. The gas volume in the vessel was replaced with carbon monoxide and then pressurized at ambient temperature with 920 psig carbon monoxide and 80 psig hydrogen (approximately 0.05 mole hydrogen). The reactor contents were then heated to 160° C. Initially, aniline was produced from nitrobenzene in 100 percent selectivity. After approximately 0.030 moles aniline had been produced, phenyl urethane production also began. After a total of 7.5 hours at 160° C., nitrobenzene conversion was complete and the solution contained 0.060 moles aniline and 0.034 moles phenyl urethane. This example demonstrates that the primary amine may be provided by reduction of the nitrogen-containing organic compound, e.g. nitrobenzene, in-situ. Note that, once the added hydrogen is utilized to reduce the nitrobenzene to aniline, the selectivity of the conversion of the remaining nitrobenzene to the urethane is greater than 50 percent.

출처 및 근거

ORD 기록
ord-c7a6c5a54275407ca09137b00b66a588
출처 데이터셋
uspto-grants-1986_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04600793

반응 노트

이 페이지에서참가 물질반응 조건실험 절차출처 및 근거반응 노트