홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Tetrahydrofuran → 1-(6-Bromo-1-methyl-1H-pyrrolo[3,2-b]pyridin-5-yl)ethan-1-amine

HRID 75292
인쇄

반응식

HRID 75292 반응식
[Br:1][C:2]1[CH:3]=[C:4]2[N:12]([CH3:13])[CH:11]=[CH:10][C:5]2=[N:6][C:7]=1[C:8]#[N:9].[CH3:14][Mg]Cl.C1COCC1.C[O-].[Na+].[BH4-].[Na+].[BH4-]>CO.C1(C)C=CC=CC=1>[Br:1][C:2]1[CH:3]=[C:4]2[N:12]([CH3:13])[CH:11]=[CH:10][C:5]2=[N:6][C:7]=1[CH:8]([NH2:9])[CH3:14]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 6

HCID 8028TetrahydrofuranHCID 28123BorohydrideHCID 4311764Sodium borohydrideHCID 10942334Sodium MethoxideHCID 867079636-Bromo-1-methyl-1H-pyrrolo[3,2-b]pyridine-5-carbonitrileHCID 178418332HCID 178418332, 화합물

생성물 1

HCID 86707983
1-(6-Bromo-1-methyl-1H-pyrrolo[3,2-b]pyridin-5-yl)ethan-1-amine

시약·촉매·용매 2

HCID 887Methanol용매2회HCID 1140Toluene용매

반응 조건

온도
7.5 °C

실험 절차

To a first vessel charged with toluene (5.1 L) was added 6-bromo-1-methyl-1H-pyrrolo[3,2-b]pyridine-5-carbonitrile (300 g, 1.27 mol) under nitrogen. The solution was cooled to 5-10° C. A 3M solution of CH3MgCl in THF (637 mL, 1.91 mol) was added slowly over a 35 minute period while maintaining the temperature of the reaction mixture below 30° C. The reaction mixture was stirred for 2 hours at 15-20° C. To a second vessel charged with methanol at 0-5° C. was added sodium methylate (24.4 mL) under nitrogen. Sodium borohydride (72.2 g, 1.91 mol) was added to the methanol solution portion-wise over a 20 minute period at 0-5° C. The borohydride solution was stirred for 1 hour. The contents of the first vessel were then transferred into the second vessel slowly over a 2 hour period while maintaining the temperature of the reaction mixture in the second vessel below 30° C. Following the transfer of the Grignard solution, the first vessel was rinsed with toluene (0.60 L) which was added to the second vessel. The first vessel was next charged with methanol (0.60 L) over a 10 minute period at a temperature less than 30° C. The methanol solution was subsequently transferred to the second vessel, and the reaction mixture was stirred at 0-5° C. for an additional 2 hours. The reaction mixture was then transferred into a third vessel charged with a 2M HCl solution (2.40 L) at 5-15° C. over a period of 1.25 hours. Following the transfer, the second vessel was rinsed with toluene (0.60 L), which was added to the third vessel, and the reaction mixture was stirred for 16 hours. The mixture was warmed to 40-45° C. and 2M NaOH (1.0 L) was added slowly over a 20 minute period until the pH of the aqueous phase was 8.5. The reaction mixture was stirred for an additional 40 minutes, and the pH of the aqueous phase was confirmed to be 8.5. The organic and aqueous phases were separated. The aqueous phase was extracted with toluene (2×3.0 L). The organic layers were combined and screened to remove particulates. The filtrate was concentrated under vacuum at 50° C. until distillation ceased. Isopropanol (3.0 L) was added, and the reaction mixture concentrated under vacuum at 50° C. Additional isopropanol (300 mL) was added to give the title compound as a solution in IPA (230.7 g by gravimetric assay).

후처리

  1. temperaturewhile maintaining the temperature of the reaction mixture below 30° C
  2. waitThe contents of the first vessel were then transferred into the second vessel slowly over a 2 hour period
  3. temperaturewhile maintaining the temperature of the reaction mixture in the second vessel below 30° C
  4. washthe first vessel was rinsed with toluene (0.60 L) which
  5. additionwas added to the second vessel
  6. additionThe first vessel was next charged with methanol (0.60 L) over a 10 minute period at a temperature less than 30° C
  7. stirringthe reaction mixture was stirred at 0-5° C. for an additional 2 hours
  8. additioncharged with a 2M HCl solution (2.40 L) at 5-15° C. over a period of 1.25 hours
  9. washthe second vessel was rinsed with toluene (0.60 L), which
  10. additionwas added to the third vessel
  11. stirringthe reaction mixture was stirred for 16 hours
  12. temperatureThe mixture was warmed to 40-45° C.
  13. addition2M NaOH (1.0 L) was added slowly over a 20 minute period until the pH of the aqueous phase
  14. stirringThe reaction mixture was stirred for an additional 40 minutes
  15. customThe organic and aqueous phases were separated
  16. extractionThe aqueous phase was extracted with toluene (2×3.0 L)
  17. customto remove particulates
  18. concentrationThe filtrate was concentrated under vacuum at 50° C. until distillation
  19. additionIsopropanol (3.0 L) was added
  20. concentrationthe reaction mixture concentrated under vacuum at 50° C
  21. additionAdditional isopropanol (300 mL) was added

출처 및 근거

ORD 기록
ord-277cc2c4a769407484184493164a83cf
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08835420B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트