홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Water → alpha-Methylene-gamma-Valerolactone Acrylic Acid

HRID 83942
인쇄

반응식

HRID 83942 반응식
O.S([O-])(OCCCCCCCCCCCC)(=O)=O.[Na+].[CH2:20]=[C:21]1[CH2:26][CH:25]([CH3:27])[O:24][C:22]1=[O:23].[C:28]([OH:32])(=[O:31])[CH:29]=[CH2:30].S(OOS([O-])(=O)=O)([O-])(=O)=O.[Na+].[Na+].[OH-].[Na+]>>[CH2:20]=[C:21]1[CH2:26][CH:25]([CH3:27])[O:24][C:22]1=[O:23].[C:28]([OH:32])(=[O:31])[CH:29]=[CH2:30]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 6

HCID 962Water2회HCID 6581Acrylic AcidHCID 14798Sodium HydroxideHCID 62655Sodium PersulfateHCID 99939gamma-Methyl-alpha-methylene-gamma-butyrolactoneHCID 3423265Sodium Lauryl Sulfate2회

생성물 1

HCID 86664974
alpha-Methylene-gamma-Valerolactone Acrylic Acid

반응 조건

온도
73 °C

실험 절차

To a 50 mL round bottom flask equipped with a magnetic stir bar was added 7.3769 g (0.343 mol) water and 0.084 g (2.70×10−4 mol) sodium dodecyl sulfate. (20% aqueous solution). The mixture was heated under flowing nitrogen to 73° C., at which point a monomer mixture consisting of 3.4691 g (2.58×10−2 mol) α-methylene-γ-valerolactone and 0.184 g (2.56×10−3 mol) acrylic acid was added via syringe pump over 115 minutes. After 10 minutes of monomer mixture addition, an aqueous mixture consisting of 13.9194 g (0.649 mol) water, 0.2360 g (6.87×10−4 mol) sodium dodecyl sulfate (20% aqueous solution), 0.0201 g (1.68×10−5 mol) sodium persulfate, and 0.0376 g of a 20% aqueous sodium hydroxide solution was also added via syringe pump over 120 minutes. After both the monomer and aqueous mixtures were added completely, the emulsion was allowed to stir for an additional 60 minutes, after which the reaction was cooled to room temperature and dried under vacuum at 100° C. Analysis of the polymer by DSC showed a single Tg at 210° C. Size exclusion chromatography yielded a molecular weight of 931 kDa and a PDI of 2.00.

후처리

  1. customTo a 50 mL round bottom flask equipped with a magnetic stir bar
  2. additionwas added via syringe pump over 115 minutes
  3. additionAfter 10 minutes of monomer mixture addition
  4. additionwas also added via syringe pump over 120 minutes
  5. additionAfter both the monomer and aqueous mixtures were added completely
  6. temperatureafter which the reaction was cooled to room temperature
  7. customdried under vacuum at 100° C
  8. customat 210° C
  9. customSize exclusion chromatography yielded a molecular weight of 931 kDa

출처 및 근거

ORD 기록
ord-814aae88dde047788853e27ef440edc9
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08846817B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트