홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acrylamide → 6-Benzyl-1,2,3,4,5,6,7,8-octahydro-1,6-naphthyridin-2-one

HRID 840148
노트
인쇄 미리보기

반응식

HRID 840148 반응식
[CH2:1]([N:8]1[CH2:13][CH2:12][C:11](=O)[CH2:10][CH2:9]1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.N1CCCC1.[C:20]([NH2:24])(=[O:23])[CH:21]=[CH2:22]>C1(C)C=CC=CC=1.O1CCOCC1.C1(C)C=CC(S(O)(=O)=O)=CC=1>[CH2:1]([N:8]1[CH2:13][CH2:12][C:11]2[NH:24][C:20](=[O:23])[CH2:21][CH2:22][C:10]=2[CH2:9]1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 6579AcrylamideHCID 192201-Benzyl-4-piperidoneHCID 31268Pyrrolidine

생성물 1

HCID 162289266-Benzyl-1,2,3,4,5,6,7,8-octahydro-1,6-naphthyridin-2-one수율 65%

시약·촉매·용매 3

HCID 6101p-Toluenesulfonic acid촉매2회HCID 1140Toluene
용매
HCID 312751,4-Dioxane용매

반응 조건

온도
150 °C

실험 절차

To a solution of 1-benzyl-4-piperidone (213 g, 1.13 mol) in toluene (700 ml) was added pyrrolidine (190 ml, 2.25 mol), the reaction mixture was fitted with a Dean-Stark head and heated to 150° C. for 18 h. The reaction mixture was cooled and evaporated under reduced pressure, p-toluenesulphonic acid (4.0 g, 0.022 mol) was then added to the residue followed by acrylamide (160 g, 2.25 mol). The reaction mixture was heated with rapid stirring to 90° C. for 1.5 h and then for a further 2 h at 120° C. The cooled mixture was then filtered and the solid obtained washed with acetone followed by ether. The mother liquors were combined, evaporated under reduced pressure and the residue partitioned between EtOAc and H2O. The organic layer was separated, dried over MgSO4 and evaporated under reduced pressure to afford a further batch of solid. The solids were combined and heated to reflux with 4-toluenesulphonic acid (10 g, 0.056 mol) in dioxane (400 ml) for 18 h. On cooling, a colourless crystalline product was formed which was filtered and washed with EtOAc to afford the subtitle compound as colourless crystals (176 g, 65%). Rf 0.1 (EtOAc). 1H NMR (CDCl3) δ: 2.20 (4H, d), 2.50 (2H, t), 2.70 (2H, s), 3.00 (2H,s), 3.65 (2H, s), 7.20-7.45 (5H, m).

후처리

  1. customthe reaction mixture was fitted with a Dean-Stark head
  2. temperatureThe reaction mixture was cooled
  3. additionwas then added to the residue
  4. temperatureThe reaction mixture was heated
  5. waitfor a further 2 h at 120° C
  6. filtrationThe cooled mixture was then filtered
  7. customthe solid obtained
  8. washwashed with acetone
  9. customevaporated under reduced pressure
  10. customthe residue partitioned between EtOAc and H2O
  11. customThe organic layer was separated
  12. dry with materialdried over MgSO4
  13. customevaporated under reduced pressure
  14. customto afford a further batch of solid
  15. temperatureheated
  16. temperatureOn cooling
  17. customa colourless crystalline product was formed which
  18. filtrationwas filtered
  19. washwashed with EtOAc

출처 및 근거

ORD 기록
ord-c5c07f6b869848858bf3955a1a072b69
출처 데이터셋
uspto-grants-2002_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06365599B1

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트