홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → Oxycodone Hydrochloride

HRID 84141
인쇄

반응식

HRID 84141 반응식
[CH3:1][N:2]1[C@@H:19]2[CH2:20][C:7]3[CH:8]=[CH:9][C:10]([O:22][CH3:23])=[C:11]4[O:12][C@H:13]5[C:14]([CH2:16][CH2:17][C@:18]2([OH:21])[C@:5]5([C:6]=34)[CH2:4][CH2:3]1)=[O:15].C(O)(=O)C.[ClH:28]>O>[CH3:1][N:2]1[C@@H:19]2[CH2:20][C:7]3[CH:8]=[CH:9][C:10]([O:22][CH3:23])=[C:11]4[O:12][C@H:13]5[C:14]([CH2:16][CH2:17][C@:18]2([OH:21])[C@:5]5([C:6]=34)[CH2:4][CH2:3]1)=[O:15].[ClH:28]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 176Acetic AcidHCID 313Hydrochloric AcidHCID 5284603Oxycodone

생성물 1

HCID 5462350Oxycodone Hydrochloride수율 96.4%

시약·촉매·용매 1

HCID 962Water용매

실험 절차

Purified oxycodone base (19.22 g, 60.95 mmol, Lot S) and a mixture of water (28.83 g) and acetic acid (2.82 g, 16.19 mmol/g, 44.70 mmol) were charged into 150-mL RBF, equipped with mechanical stirrer. Stirring of the mixture at ambient temperature (230 RPM) resulted in a thin suspension formation. Hydrochloric acid (6.94 g, 10.094 mmol/g, 70.09 mmol) was added portion-wise over 45 minutes: at the beginning—about 2.30 g (over ˜4 minutes, the mixture became transparent, followed by a precipitation); the rest of the hydrochloric acid was added portion-wise (5 drops at once) over 40 minutes (rate of stirring was increase to 250 RPM after 30 minutes). The mixture was stirred for 0.5 hours at ambient temperature, 0.5 hours at ice-bath temperature, and cold IPA (0° C., 77 mL) was added over 25 minutes. Stirring continued for 0.5 hours, and the precipitated product was filtered off. It was washed with IPA (2×40 mL) and acetone (2×40 mL), dried on filter providing 21.73 g (58.76 mmol, 96.4% yield) of oxycodone HCl crystalline white solids, Lot T. Impurity profiles of materials of interest were monitored by HPLC, normalization method, as shown in Table 10.

후처리

  1. additionwere charged into 150-mL RBF
  2. customequipped with mechanical stirrer
  3. customresulted in a thin suspension formation
  4. customfollowed by a precipitation)
  5. additionthe rest of the hydrochloric acid was added portion-wise (5 drops at once) over 40 minutes
  6. stirring(rate of stirring was increase to 250 RPM after 30 minutes)
  7. stirringThe mixture was stirred for 0.5 hours at ambient temperature, 0.5 hours at ice-bath temperature, and cold IPA (0° C., 77 mL)
  8. additionwas added over 25 minutes
  9. stirringStirring
  10. waitcontinued for 0.5 hours
  11. filtrationthe precipitated product was filtered off
  12. washIt was washed with IPA (2×40 mL) and acetone (2×40 mL)
  13. customdried
  14. filtrationon filter

출처 및 근거

ORD 기록
ord-9ceb748393ec472eb3210325b868d45d
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08846923B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트