홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium hydride → Ethyl 5-(1-benzylindol-3yl)-2,4-pentadienoate

HRID 845504
인쇄

반응식

HRID 845504 반응식
[H-].[Na+].[CH3:3][CH2:4][O:5][C:6](/[CH:8]=[CH:9]/[CH2:10]P(OCC)(OCC)=O)=[O:7].[CH2:19]([N:26]1[C:34]2[C:29](=[CH:30][CH:31]=[CH:32][CH:33]=2)[C:28]([CH:35]=O)=[CH:27]1)[C:20]1[CH:25]=[CH:24][CH:23]=[CH:22][CH:21]=1>O1CCCC1.O>[CH2:19]([N:26]1[C:34]2[C:29](=[CH:30][CH:31]=[CH:32][CH:33]=2)[C:28]([CH:35]=[CH:10][CH:9]=[CH:8][C:6]([O:5][CH2:4][CH3:3])=[O:7])=[CH:27]1)[C:20]1[CH:21]=[CH:22][CH:23]=[CH:24][CH:25]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 24758Sodium hydrideHCID 2621041-benzyl-1H-indole-3-carbaldehydeHCID 5365783Triethyl 4-phosphonocrotonate, mixture of isomers

생성물 1

HCID 54565894Ethyl 5-(1-benzylindol-3yl)-2,4-pentadienoate수율 62%

시약·촉매·용매 2

HCID 962Water용매
HCID 8028
Tetrahydrofuran
용매

실험 절차

To a suspension of 1.08 g (60% reagent, 27 mmol) of sodium hydride in 20 ml of tetrahydrofuran (THF), stirred in an ice bath, was added dropwise 6 ml (6.7 g, 27 mmol) of triethyl 4-phosphonocrotonate. The resulting mixture was stirred for an additional 1 hour in the cooling bath and a solution of 4.2 g (18 mmol) of 1-benzylindol-3-carboxaldehyde in 25 ml of water. This mixture was transferred to a separatory funnel and the layers were separated. The aqueous layer was extracted with two 50 ml portions of ethyl acetate. The combined organic layer was washed with two 25 ml portions of brine, dried (magnesium sulfate) and concentrated on a rotary evaporator to give an oil. Purification on a dry column (25% ethyl acetate in hexane) followed by crystallization (acetone-ether) gave 3.7 g of product as orange crystals, m.p. 110-112. MS (EI): 331 (M+), 240 (M+--C7H7), 167 (M+--C7H7 --CO2C2H5). NMR spectrum (CDCl3) shows a triplet centered at δ1.26 (J=7 Hz), a singlet at δ5.21, a doublet centered at δ5.8 which is the signal of the olefinic proton adjacent to the carbonyl group. The remainder of the proton signals cluster around 7.25 ppm.

후처리

  1. stirringThe resulting mixture was stirred for an additional 1 hour in the cooling bath
  2. customThis mixture was transferred to a separatory funnel
  3. customthe layers were separated
  4. extractionThe aqueous layer was extracted with two 50 ml portions of ethyl acetate
  5. washThe combined organic layer was washed with two 25 ml portions of brine
  6. dry with materialdried (magnesium sulfate)
  7. concentrationconcentrated on a rotary evaporator
  8. customto give an oil
  9. customPurification on a dry column (25% ethyl acetate in hexane)
  10. customfollowed by crystallization (acetone-ether)

출처 및 근거

ORD 기록
ord-146cb2c545434e20965ee8e24bedd5d3
출처 데이터셋
uspto-grants-1988_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04758586

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트