홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phenolate Sodium → 3-Phenoxy-4-fluoro-benzaldehyde dimethyl acetal

HRID 851289
인쇄

반응식

HRID 851289 반응식
[C:1]1([O-:7])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[Na+].[CH3:9][O:10][CH:11]([O:20][CH3:21])[C:12]1[CH:17]=[CH:16][C:15]([F:18])=[C:14](Br)[CH:13]=1>COCCOCCOC>[CH3:9][O:10][CH:11]([O:20][CH3:21])[C:12]1[CH:17]=[CH:16][C:15]([F:18])=[C:14]([O:7][C:1]2[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=2)[CH:13]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 4445035Phenolate SodiumHCID 222608642-Bromo-4-(dimethoxymethyl)-1-fluorobenzene

생성물 1

HCID 205020423-Phenoxy-4-fluoro-benzaldehyde dimethyl acetal수율 75.4%

시약·촉매·용매 1

HCID 8150Diglyme용매

반응 조건

온도
155 °C

실험 절차

0.4 g of copper-I bromide and 43.5 g (0.375 mole) of sodium phenolate were added to 95 ml of diethylene glycol dimethyl ether (diglyme). The temperature of the mixture rose to about 80° C. To effect dehydration, 15 ml of diglyme (boiling point 160° C.) were distilled off under normal pressure. 57.3 g (0.23 mole) of 3-bromo-4-fluoro-benzaldehyde dimethyl acetal were then added dropwise in the course of 10 minutes, at 150°-155° C., and the reaction mixture was stirred for a further 7 hours at 155° C. Gas chromatography indicated that all of the precursor had then been converted. Subsequently, the solvent was distilled off at 40° C./10 mm Hg, the residue was dissolved in 300 ml of toluene and, after adding 10 g of "Celite" (Trade Mark) 545 as a filter aid, the mixture was filtered to remove the inorganic material. The filtrate was washed with twice 100 ml of 50% strength sodium hydroxide solution, the solvent was then stripped off in vacuo and the residue was distilled in vacuo. 45.5 g (75. of theory) of 3-phenoxy-4-fluoro-benzaldehyde dimethyl acetal were thus obtained in the form of a colorless oil with a boiling point of 128°-130° C./0.1 mm Hg.

후처리

  1. customrose to about 80° C
  2. distillationTo effect dehydration, 15 ml of diglyme (boiling point 160° C.) were distilled off under normal pressure
  3. distillationSubsequently, the solvent was distilled off at 40° C./10 mm Hg
  4. dissolutionthe residue was dissolved in 300 ml of toluene
  5. additionafter adding 10 g of "Celite" (Trade Mark) 545 as a filter aid
  6. filtrationthe mixture was filtered
  7. customto remove the inorganic material
  8. washThe filtrate was washed with twice 100 ml of 50% strength sodium hydroxide solution
  9. distillationthe residue was distilled in vacuo

출처 및 근거

ORD 기록
ord-505159c447234f3ab842ecc7e8fe5c33
출처 데이터셋
uspto-grants-1983_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04383949

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트