홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → Ethyl (4-mercapto-2-methylphenoxy)acetate

HRID 854531
인쇄

반응식

HRID 854531 반응식
Cl[Si](Cl)(C)C.[CH2:6]([O:8][C:9](=[O:23])[CH2:10][O:11][C:12]1[CH:17]=[CH:16][C:15]([S:18](Cl)(=O)=O)=[CH:14][C:13]=1[CH3:22])[CH3:7].CN1CCN(C)C1=O.O>ClC(Cl)C.ClCCCl.[Zn]>[CH2:6]([O:8][C:9](=[O:23])[CH2:10][O:11][C:12]1[CH:17]=[CH:16][C:15]([SH:18])=[CH:14][C:13]=1[CH3:22])[CH3:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 962WaterHCID 6398DichlorodimethylsilaneHCID 66611,3-Dimethyl-2-imidazolidinoneHCID 11415129Ethyl 4-chlorosulfonyl-2-methylphenoxyacetate

생성물 1

HCID 16641178Ethyl (4-mercapto-2-methylphenoxy)acetate

시약·촉매·용매 3

HCID 23994Zinc촉매
HCID 11
1,2-Dichloroethane
용매
HCID 63651,1-Dichloroethane용매

반응 조건

온도
52 °C

실험 절차

This compound can also be made by the following procedure: To a stirred suspension of Zn powder (10 μm, 78.16 g, 1.2 mol) and dichlorodimethyl silane (154.30 g, 145.02 mL, 1.2 mol) in 500 mL of dichloroethane is added a solution of (4-chlorosulfonyl-2-methyl-phenoxy)-acetic acid ethyl ester (100 g, 0.34 mol) and 1,3-dimethylimidazolidin-2-one (116.98 g, 112.05 mL, 1.02 mol) in 1 L of DCE. Addition is at a rate so as to maintain the internal temperature at ˜52° C., cooling with chilled water as necessary. After addition is complete, the mixture is heated at 75° C. for 1 hour. It is then cooled to room temperature, filtered and concentrated iv. Add MTBE, washed twice with saturated LiCl solution concentrate iv again. Take up the residue in CH3CN, ish with hexane (4×) and concentrate iv to yield a biphasic mixture. Let stand in a separatory funnel and separate layers, keeping the bottom layer for product. Filtration through a plug of silica gel (1 Kg, 25% EtOAc/hexane) and subsequent concentration yielded 61 g (79%) of a clear, colorless oil.

후처리

  1. additionAddition
  2. additionAfter addition
  3. temperaturethe mixture is heated at 75° C. for 1 hour
  4. temperatureIt is then cooled to room temperature
  5. filtrationfiltered
  6. concentrationconcentrated iv
  7. washAdd MTBE, washed twice with saturated LiCl solution
  8. concentrationconcentrate iv again
  9. concentrationish with hexane (4×) and concentrate iv
  10. customto yield a biphasic mixture
  11. customseparate layers
  12. filtrationFiltration
  13. concentrationthrough a plug of silica gel (1 Kg, 25% EtOAc/hexane) and subsequent concentration
  14. customyielded 61 g (79%) of a clear, colorless oil

출처 및 근거

ORD 기록
ord-85735f00ce1e4768a38150e6db3231ea
출처 데이터셋
uspto-grants-2007_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07259175B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트