홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Allyl bromide → Isoprene butadiene

HRID 859840
인쇄

반응식

HRID 859840 반응식
[CH2:1]=[CH:2][CH:3]=[CH2:4].[H-].[CH2:6]([Al+]CC(C)C)C(C)C.[Nd].C(Br)C=C>[Nd].CCCCCC.C(O)CCC>[CH2:1]=[CH:2][C:3](=[CH2:6])[CH3:4].[CH2:1]=[CH:2][CH:3]=[CH2:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 7841Allyl bromideHCID 78451,3-ButadieneHCID 23934Neodymium2회HCID 21225700Diisobutylaluminumhydride

생성물 1

HCID 168288Isoprene butadiene

시약·촉매·용매 3

HCID 23934Neodymium촉매
HCID 263
1-Butanol
용매
HCID 8058Hexane용매3회

반응 조건

온도
20 °C

실험 절차

In this experiment, an isoprene-butadiene copolymer was synthesized using an alcohol modified neodymium catalyst system with a different catalyst component molar ratio than that described in Example 3. In this procedure, a one gallon (3.78 liter) reactor was charged with 1,088 grams of hexane containing 93.5 grams of butadiene and 668 grams of 1.23 molar diisobutylaluminum hydride (DIBAH) in hexane (i.e., 25% weight percent DIBAH). To this solution was added 26.22 grams of n-butanol with stirring and with temperatures maintained at 20° C. After stirring for thirty minutes, 107.5 grams of a 10.1% neodymium solution (neodymium neodecanoate), dilute with 158 grams of dry hexane, was charged to the reactor. The solution was stirred for another thirty minutes after which time 21.4 grams of allyl bromide was added. The cooling was stopped and the mixture allowed to warm up to ambient (and above) temperature. After the exotherm subsided, requiring about one hour, the catalyst solution was heat aged at 65° C. for ninety minutes. The aged catalyst was then cooled and stored in a dry container under nitrogen. The catalyst prepared had a [butanol-DIBAH] Nd-allyl bromide-butadiene molar component ratio of [4.7-15.5]-1-2.35-23, respectively, and a concentration of 0.025 molarity with respect to the neodymium.

후처리

  1. stirringAfter stirring for thirty minutes
  2. additionwas charged to the reactor
  3. additionwas added
  4. temperatureto warm up to ambient (and above) temperature
  5. temperaturethe catalyst solution was heat
  6. waitaged at 65° C. for ninety minutes
  7. temperatureThe aged catalyst was then cooled
  8. customThe catalyst prepared

출처 및 근거

ORD 기록
ord-68e068c973804321a526d322e6f186a3
출처 데이터셋
uspto-grants-2006_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07153805B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트