Sulfuric Acid → (2S)-5-[(benzyloxy)amino]-2-cyanopiperidine

HRID 870497

반응식

HRID 870497 반응식
S(=O)(=O)(O)O.[CH2:6]([O:13][N:14]=[C:15]1[CH2:20][NH:19][C@H:18]([C:21]#[N:22])[CH2:17][CH2:16]1)[C:7]1[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1.C(O[BH-](OC(=O)C)OC(=O)C)(=O)C.[Na+].C(=O)([O-])O.[K+]>C(OCC)(=O)C>[CH2:6]([O:13][NH:14][CH:15]1[CH2:20][NH:19][C@H:18]([C:21]#[N:22])[CH2:17][CH2:16]1)[C:7]1[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1

참가 물질

6

반응물 4

HCID 1118Sulfuric AcidHCID 516893Potassium BicarbonateHCID 5049666Sodium triacetoxyborohydrideHCID 90088575(2S)-5-[(benzyloxy)imino]-2-cyanopiperidine

생성물 1

HCID 117599345(2S)-5-[(benzyloxy)amino]-2-cyanopiperidine수율 88%

시약·촉매·용매 1

HCID 8857Ethyl Acetate용매

반응 조건

온도
25 °C

실험 절차

Sulphuric acid (11.7 ml, 0.217 mol) was slowly added to a stirred solution of (2S)-5-[(benzyloxy)imino]-2-cyanopiperidine (IX) (10 gm, 0.0436 mol, prepared according to the procedure described in step 6) in ethyl acetate (150 ml) at −10° C. After 10 minutes of stirring, sodium triacetoxy borohydride (NaHB(OOCCH3)3) (11.7 gm, 0.0519 mol, 95% purity) was added in small portions while maintaining temperature below −5° C. After completion of the addition, stirring was further continued for 2 hour at the same temperature. The pH of the reaction mixture was adjusted to about pH 7 by using 30% aqueous potassium hydrogen carbonate solution. The mixture was allowed to warm to 25° C. and the reaction mixture was filtered under suction. The organic layer was separated and the aqueous layer extracted with fresh ethyl acetate (50 ml). The combined organic layer was washed with water (50 ml) and brine (50 ml), dried over anhydrous sodium sulphate and the solvent evaporated under reduced pressure to obtain 8.88 gm of (2S)-5-[(benzyloxy)amino]-2-cyanopiperidine (X) as an oil, in 88% yield. This was used as such for the next step without further purification.

후처리

  1. customprepared
  2. customat −10° C
  3. temperaturewhile maintaining temperature below −5° C
  4. additionAfter completion of the addition
  5. stirringstirring
  6. waitwas further continued for 2 hour at the same temperature
  7. filtrationthe reaction mixture was filtered under suction
  8. customThe organic layer was separated
  9. extractionthe aqueous layer extracted with fresh ethyl acetate (50 ml)
  10. washThe combined organic layer was washed with water (50 ml) and brine (50 ml)
  11. dry with materialdried over anhydrous sodium sulphate
  12. customthe solvent evaporated under reduced pressure

출처 및 근거

ORD 기록
ord-242d5e0d143849a2b113fb23fc02f08f
출처 데이터셋
uspto-grants-2015_03
특허 번호
US08969567B2

연결된 노트

불러오는 중…