홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Imidazole → 1H-Imidazole, 1-(1,2,2-trifluoroethenyl)-

HRID 883446
인쇄

반응식

HRID 883446 반응식
[K].N1C=CN=C1.FC(F)(F)C(OCC)=O.[F:16][C:17]([N:22]1[CH:26]=[CH:25][N:24]=[CH:23]1)(F)[CH:18]([F:20])[F:19]>O1CCCC1>[F:16][C:17]([N:22]1[CH:26]=[CH:25][N:24]=[CH:23]1)=[C:18]([F:20])[F:19]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 795ImidazoleHCID 9794Ethyl trifluoroacetateHCID 5462222PotassiumHCID 132688751-(1,1,2,2-Tetrafluoroethyl)-1H-imidazole

생성물 1

HCID 674939581H-Imidazole, 1-(1,2,2-trifluoroethenyl)-수율 13%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran
용매

반응 조건

온도
-78 °C

실험 절차

Into a 50 ml autoclave were poured 10.6 g (100 mmol) of potassium salt of imidazole and tetrahydrofuran (30 ml), and the inside of the autoclave was cooled to −78° C., and evacuation and replacement by nitrogen were carried out three times. After the inside of a system was evacuated, TFE was introduced until the inside pressure of the system reached 0.1 MPa·G. Then the temperature of the reaction system was increased to 100° C., and TFE was further introduced to maintain the inside pressure of the reaction system at 0.3 to 0.5 MPa·G. Supply of TFE was stopped when the amount of TFE reached 1.1 equivalents (11 g=110 mmol) to the potassium salt of imidazole, and stirring was continued at 100° C. Fifteen hours after starting of the stirring, the inside of the reaction system was brought to room temperature, followed by evacuation to terminate the reaction. To this crude reaction product was added 2.84 g (20 mmol) of ethyl trifluoroacetate, and it was confirmed by a 19F-NMR analysis based on ethyl trifluoroacetate that 1-(1,1,2,2-tetrafluoroethyl)imidazole had been produced at yield of 13% and 1-(1,2,2-trifluoroethenyl)imidazole had been produced at yield of 56%. Also according to gas chromatography analysis, it was confirmed that 14% of imidazole remained.

후처리

  1. customAfter the inside of a system was evacuated
  2. additionTFE was introduced until the inside pressure of the system
  3. temperatureThen the temperature of the reaction system was increased to 100° C.
  4. additionTFE was further introduced
  5. temperatureto maintain the inside pressure of the reaction system at 0.3 to 0.5 MPa·G
  6. customwas continued at 100° C
  7. customFifteen hours
  8. customwas brought to room temperature
  9. customto terminate
  10. customthe reaction
  11. customTo this crude reaction product

출처 및 근거

ORD 기록
ord-889edef6889148c28b243c8d0741c0b1
출처 데이터셋
uspto-grants-2012_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08236887B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트