홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → 1-Benzyl-4-phenylpiperidine-4-carboxamide

HRID 895791
인쇄

반응식

HRID 895791 반응식
[CH2:1]([N:8]1[CH2:13][CH2:12][C:11]([C:20]#[N:21])([C:14]2[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=2)[CH2:10][CH2:9]1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[OH-].[Na+].S(=O)(=O)(O)[OH:25]>O.C1(C)C=CC=CC=1.C(O)(=O)C>[CH2:1]([N:8]1[CH2:9][CH2:10][C:11]([C:14]2[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=2)([C:20]([NH2:21])=[O:25])[CH2:12][CH2:13]1)[C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 1118Sulfuric AcidHCID 14798Sodium Hydroxide2회HCID 1914081-Benzyl-4-cyano-4-phenylpiperidine2회

생성물 1

HCID 964231-Benzyl-4-phenylpiperidine-4-carboxamide수율 95%

시약·촉매·용매 3

HCID 176Acetic Acid용매HCID 962
Water
용매
3회
HCID 1140Toluene용매2회

반응 조건

온도
60 °C

실험 절차

A mixture of 3 kg of commercial 1-benzyl-4-cyano-4-phenylpiperidine, 6 l of water, 8.98 l of toluene and 1.35 kg of an aqueous 35% sodium hydroxide solution is heated under nitrogen at 60° C. and the aqueous phase is separated out by settling at this temperature. The toluene phase is dried by azeotropic distillation and the solution thus obtained containing the 1-benzyl-4-cyano-4-phenylpiperidine base is added to a mixture of 2.83 kg of 95% sulfuric acid, 1.73 kg of glacial acetic acid and 3 l of toluene. The mixture thus obtained is heated for 6 hours, the heating is then stopped, the mixture is cooled to 60° C. and 3 l of water are added at this temperature. The mixture is allowed to cool to room temperature (about 20° C.) and is then poured into 8.65 l of 30% sodium hydroxide and 6.75 l of water. The temperature rises gradually to 75° C. The phases are separated by settling while hot and the organic phase is washed with water and dried azeotropically. The toluene solution is concentrated to half its volume and then cooled gradually to 60° C. and the crystallization is initiated. The crystallization is completed by cooling to 0° C. over 2 hours. The precipitate thus obtained is filtered off, washed and dried under vacuum at 60° C. 2.68 kg of 1-benzyl-4-phenyl-4-piperidinecarboxamide are thus obtained;

후처리

  1. customthe aqueous phase is separated out
  2. dry with materialThe toluene phase is dried by azeotropic distillation
  3. customthe solution thus obtained
  4. customThe mixture thus obtained
  5. temperatureis heated for 6 hours
  6. temperaturethe mixture is cooled to 60° C.
  7. temperatureto cool to room temperature (about 20° C.)
  8. customrises gradually to 75° C
  9. customThe phases are separated
  10. washis washed with water
  11. customdried azeotropically
  12. concentrationThe toluene solution is concentrated to half its volume
  13. temperaturecooled gradually to 60° C.
  14. customthe crystallization
  15. customThe crystallization
  16. temperatureby cooling to 0° C. over 2 hours
  17. customThe precipitate thus obtained
  18. filtrationis filtered off
  19. washwashed
  20. customdried under vacuum at 60° C

출처 및 근거

ORD 기록
ord-caf87a1502044bfe95fd5f63f7299f11
출처 데이터셋
uspto-grants-2005_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06916929B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트