Ammonia → 1-(8-Quinolyl)-2-methylindene
반응식
[Li]CCCC.[CH3:6][CH:7]1[CH2:15][C:14]2[C:9](=[CH:10][CH:11]=[CH:12][CH:13]=2)[C:8]1=O.Br[C:18]1[CH:27]=[CH:26][C:25]2[C:20](=[CH:21][CH:22]=[CH:23][CH:24]=2)[N:19]=1.Cl.N>C1COCC1>[N:19]1[C:20]2[C:25](=[CH:24][CH:23]=[CH:22][C:21]=2[CH:8]2[C:9]3[C:14](=[CH:13][CH:12]=[CH:11][CH:10]=3)[CH:15]=[C:7]2[CH3:6])[CH:26]=[CH:27][CH:18]=1참가 물질
반응 조건
- 온도
- 80 °C
실험 절차
6.70 ml of n-BuLi (16.8 mmol) was added dropwise at 100° C. to a solution of 3.50 g of o-bromoquinoline (16.8 mmol) in 50 ml of THF, and the mixture was stirred for 15 minutes at 80° C. Next, a solution of 50 ml of THF and 2.45 g of 2- methyl-1-indanone (16.8 mmol) was added within ten minutes to the lithiated bromoquinoline. The solution was left to return to room temperature, and subsequently boiled for three hours in reflux. After cooling to room temperature, ice was added and the mixture was acidified to pH 1 with hydrochloric acid, and subsequently heated under relfux for three hours. The reaction mixture was adjusted with ammonia solution to pH 9, and the aqueous phase was extracted with diethyl ether. The combined organic phases were dried, and the solvent was removed. The raw product was purified by distillation in a vacuum at 150 to 160° C. and 10−2 mbar. 1.5 g of 1-(8-quinolyl)-2-methylindene (45%) were obtained in the form of a viscous yellow resin.
후처리
- waitThe solution was left
- customto return to room temperature
- waitsubsequently boiled for three hours
- temperaturein reflux
- temperatureAfter cooling to room temperature
- additionice was added
- temperaturesubsequently heated under relfux for three hours
- extractionthe aqueous phase was extracted with diethyl ether
- customThe combined organic phases were dried
- customthe solvent was removed
- distillationThe raw product was purified by distillation in a vacuum at 150 to 160° C.
출처 및 근거
- ORD 기록
- ord-f9422e90423f495bbd3a461ef7b1750d
- 출처 데이터셋
- uspto-grants-2005_07
- 특허 번호
- US06919412B1
반응 노트
불러오는 중…