홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanol → HCID 178430148, 화합물

HRID 896965
인쇄

반응식

HRID 896965 반응식
C=CC1C=CC=CC=1.C(O)(=O)C(C)=C.CO.[OH-].[K+].C(OOC(=O)CCCCCCCCCCC)(=O)CCCCCCCCCCC.[CH3:47][C:48]1[C:53]([NH:54][C:55]2[C:60]3[C:61]([Cl:68])=[C:62]([Cl:67])[C:63]([Cl:66])=[C:64]([Cl:65])[C:59]=3[C:57](=[O:58])[N:56]=2)=[CH:52][CH:51]=[CH:50][C:49]=1[NH:69][C:70]1[C:75]2[C:76]([Cl:83])=[C:77]([Cl:82])[C:78]([Cl:81])=[C:79]([Cl:80])[C:74]=2[C:72](=[O:73])[N:71]=1>CS(C)=O.C1(=O)C2C(=CC=CC=2)CN1.O>[C:57]1(=[O:58])[C:59]2[C:60](=[CH:61][CH:62]=[CH:63][CH:64]=2)[CH2:55][NH:56]1.[CH3:47][C:48]1[C:49]([NH:69][C:70]2[C:75]3[C:76]([Cl:83])=[C:77]([Cl:82])[C:78]([Cl:81])=[C:79]([Cl:80])[C:74]=3[C:72](=[O:73])[N:71]=2)=[CH:50][CH:51]=[CH:52][C:53]=1[NH:54][C:55]1[C:60]2[C:61]([Cl:68])=[C:62]([Cl:67])[C:63]([Cl:66])=[C:64]([Cl:65])[C:59]=2[C:57](=[O:58])[N:56]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 5

HCID 887MethanolHCID 7773Lauroyl peroxideHCID 14797Potassium HydroxideHCID 1657302-Methylprop-2-enoic acid;styreneHCID 178430147HCID 178430147, 화합물4회

생성물 1

HCID 178430148HCID 178430148, 화합물

시약·촉매·용매

3
HCID 679Dimethyl Sulfoxide용매HCID 962Water용매2회HCID 10199Phthalimidine용매2회

반응 조건

온도
0 °C

실험 절차

Four parts of a styrene/methacrylic acid copolymer (acid value: 250; molecular weight: 15,000) and 1 part of ELEMINOL RS-30 (trade name, product of Sanyo Chemical Industries, Ltd.) as dispersing agents were dissolved in 80 parts of dimethyl sulfoxide, and 10 parts of an isoindolinone pigment (C.I. Pigment Yellow 109) were suspended in the resultant solution in a flask at 25° C. under an air atmosphere. A 30% methanol solution of potassium hydroxide was then added dropwise little by little to dissolve the isoindolinone pigment. After the pigment solution was stirred for 3 hours, lauroyl peroxide as a polymerization initiator was added to and dissolved in the pigment solution in a proportion of 0.1 parts per 10 parts of the pigment, and the resultant solution was quickly poured into ion-exchanged water (400 parts of ion-exchanged water per 10 parts of the pigment; 0° C.) stirred by an impellor type agitating blade (800 rpm), purged with nitrogen and cooled and temperature-maintained by means of 2 system dispensers (manufactured by Musashi Engineering K.K.; needle internal diameter: 0.57 mm; delivery pressure: 4.0 kgf/cm2) to obtain an aqueous dispersion of isoindolinone-pigment-containing particles having an average particle diameter of 39.9 nm. This aqueous dispersion was transferred to a reaction vessel equipped with a mantle heater, cooling tower, stirrer and thermometer and purged with nitrogen. While continuing purging with nitrogen and stirring at 300 rpm, styrene and methacrylic acid as ethylenically unsaturated compounds were then added dropwise over 3 hours in proportions of 5.5 parts and 0.5 parts, respectively, per 10 parts of the pigment. The system was then heated to an internal temperature of 80° C. to continue the reaction for 8 hours while retaining the temperature of 80° C. After the reaction was conducted for additional 1 hour at a temperature raised to 90° C., the reaction mixture was cooled back to room temperature.

후처리

  1. addition(trade name, product of Sanyo Chemical Industries, Ltd.) as dispersing agents
  2. stirringagitating blade (800 rpm)
  3. custompurged with nitrogen
  4. temperaturecooled
  5. temperaturetemperature-maintained by means of 2 system dispensers (manufactured by Musashi Engineering K.K.; needle internal diameter: 0.57 mm; delivery pressure: 4.0 kgf/cm2)

출처 및 근거

ORD 기록
ord-5fb02b2790cc4a09a842d8de43243e06
출처 데이터셋
uspto-grants-2005_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06921433B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트