홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → Hexylnorbornene

HRID 909978
인쇄

반응식

HRID 909978 반응식
[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH3:6].[C:7]1([CH3:13])[CH:12]=[CH:11]C=[CH:9][CH:8]=1.F[C:15]1C([B-](C2C(F)=C(F)C(F)=C(F)C=2F)(C2C(F)=C(F)C(F)=C(F)C=2F)C2C(F)=C(F)C(F)=C(F)C=2F)=C(F)C(F)=C(F)C=1F.C[NH+](C)C1C=CC=CC=1.ClCCl>C1COCC1.C1(C)C=C(C)C=C(C)C=1>[CH2:2]([C:1]12[CH2:13][CH:7]([CH2:12][CH2:11]1)[CH:8]=[CH:9]2)[CH2:3][CH2:4][CH2:5][CH2:6][CH3:15]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 1140TolueneHCID 6344DichloromethaneHCID 115971-HexeneHCID 10996402N,N-dimethylanilinium tetrakis(pentafluorophenyl)borate

생성물 1

HCID 21946566Hexylnorbornene

시약·촉매·용매 2

HCID 7947Mesitylene용매
HCID 8028
Tetrahydrofuran
용매

반응 조건

온도
120 °C

실험 절차

HxNB (8.94 g, 0.05 mol), diPhNB (16.1 g, 0.05 mol), 1-hexene (4.2 g, 0.05 mol) and toluene (142.0 g) were combined in a 250 mL serum bottle and heated to 120° C. in an oil bath to form a solution. To this solution were added [Pd(PCy3)2(O2CCH3)(NCCH3)]tetrakis(pentafluorophenyl)borate (Pd1446) (5.8E-3 g, 4.0E-6 mol) and N,N-dimethylanilinium tetrakis(pentafluorophenyl)borate (DANFABA) (3.2E-3 g, 4.0E-6 mol), each in the form of a concentrated dichloromethane solution. After addition, the resulting mixture was maintained at 120° C. for 6 hours. The copolymer was precipitated by adding methanol drop wise into the vigorously stirred reaction mixture. The precipitated copolymer was collected by filtration and dried in an oven at 80° C. under vacuum. After drying, 12.0 g was obtained (48%). The molecular weight of the copolymer was determined by GPC in THF solvent (polystyrene standard) to be Mw=16,196 and Mn=8,448. The composition of the copolymer was determined by 1H-NMR to be 54/46 HxNB/diPhNB. The refractive indices of this polymer were measured by prism coupling method and determined to be 1.5569 in TE mode and 1.5555 in TM mode at a wavelength of 633 nm. The dried copolymer was dissolved in sufficient mesitylene to result in a 10 wt % copolymer solution.

후처리

  1. customto form a solution
  2. additionAfter addition
  3. temperaturethe resulting mixture was maintained at 120° C. for 6 hours
  4. customThe copolymer was precipitated
  5. additionby adding methanol
  6. customdrop wise into the vigorously stirred reaction mixture
  7. filtrationThe precipitated copolymer was collected by filtration
  8. customdried in an oven at 80° C. under vacuum
  9. customAfter drying
  10. custom12.0 g was obtained (48%)
  11. customto result in a 10 wt % copolymer solution

출처 및 근거

ORD 기록
ord-f6b8d2c00ea544bf847a4772bdc0687d
출처 데이터셋
uspto-grants-2011_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08021825B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트