홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → Hexylnorbornene

HRID 909980
인쇄

반응식

HRID 909980 반응식
[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH3:6].[C:7]1([CH3:13])[CH:12]=[CH:11]C=[CH:9][CH:8]=1.Cl[CH2:15]Cl>C1COCC1.C1(C)C=C(C)C=C(C)C=1>[CH2:2]([C:1]12[CH2:13][CH:7]([CH2:12][CH2:11]1)[CH:8]=[CH:9]2)[CH2:3][CH2:4][CH2:5][CH2:6][CH3:15]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 1140TolueneHCID 6344DichloromethaneHCID 115971-Hexene

생성물 1

HCID 21946566Hexylnorbornene

시약·촉매·용매 2

HCID 7947Mesitylene용매HCID 8028Tetrahydrofuran용매

반응 조건

온도
80 °C

실험 절차

HxNB, (10.0 g, 0.056 mol), 1-hexene (4.71 g, 0.056 mol) and toluene (56.7 g) were combined in a 250 mL serum bottle and heated to 80° C. in an oil bath to form a solution. To this solution were added Pd1446, (4.10E-4 g, 2.80E-7 mol) and DANFABA, (2.20E-4 g, 2.80E-7 mol), each in the form of a concentrated solution in dichloromethane. After addition, the resulting mixture was maintained at 80° C. for 40 minutes. The homopolymer was precipitated by adding methanol drop wise into the vigorously stirred reaction mixture. The precipitated copolymer was collected by filtration and dried in an oven at 60° C. under vacuum. After drying, 5.8 g was obtained (58%). The molecular weight of the copolymer, determined by GPC in THF solvent (polystyrene standard) provided Mw=121,541 and Mn=59,213. The refractive indices of this polymer were measured by prism coupling method and determined to be 1.5146 in TE mode and 1.5129 in TM mode at a wavelength of 633 nm. The Tg (based on thermomechanical analysis (TMA) measurement) of this polymer was 208° C. The dried homopolymer was dissolved in sufficient mesitylene to result in a 10 wt % homopolymer solution.

후처리

  1. customto form a solution
  2. additionAfter addition
  3. temperaturethe resulting mixture was maintained at 80° C. for 40 minutes
  4. customThe homopolymer was precipitated
  5. additionby adding methanol
  6. customdrop wise into the vigorously stirred reaction mixture
  7. filtrationThe precipitated copolymer was collected by filtration
  8. customdried in an oven at 60° C. under vacuum
  9. customAfter drying
  10. custom5.8 g was obtained (58%)
  11. customprovided Mw=121,541 and Mn=59,213
  12. customwas 208° C
  13. customto result in a 10 wt % homopolymer solution

출처 및 근거

ORD 기록
ord-6803ea5cdee54608870d159d646fa15c
출처 데이터셋
uspto-grants-2011_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08021825B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트