홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Cyclopentanone → 2-Pentylcyclopentan-1-one

HRID 928897
인쇄

반응식

HRID 928897 반응식
[C:1]1(=[O:6])[CH2:5][CH2:4][CH2:3][CH2:2]1>[Pd]>[CH2:3]([CH:2]1[CH2:3][CH2:4][CH2:5][C:1]1=[O:6])[CH2:2][CH2:1][CH2:5][CH3:4]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 8452Cyclopentanone

생성물 1

HCID 209592-Pentylcyclopentan-1-one수율 108.4%

시약·촉매·용매 1

HCID 23938Palladium촉매

실험 절차

A 3-L reaction flask was charged with cyclopentanone (500 g, 6 mol), water (H2O) (500 mL) and sodium hydroxide (NaOH) (10 g, 0.25 mol). Valeraldehyde (430 g, 5 mol) was fed into the reaction flask over 3 hours while the temperature was maintained at 25-30° C. After the feeding was completed, the reaction was aged for 2 hours and neutralized with hydrochloric acid (HCl) (30 g, 0.3 mol) while the temperature was maintained at 25-30° C. The reaction mass was further aged for 2 hours. The organic layer was separated and washed with saturated aqueous sodium bicarbonate (NaHCO3) (200 mL). The obtained crude product was fractionated to provide 2-pentylidene-cyclopentanone (523 g) having a boiling point of 122° C. at 3 mmHg A 1-L zipper autoclave was charged with 2-pentylidine cyclopentanone (523 g) and palladium on carbon (Pd/C) (2 g). The autoclave was purged three times with nitrogen followed by three times with hydrogen. The autoclave agitator was then turned on to 1500 rpm and the pressure was set to 100 psi. The reaction was allowed to exotherm to about 120° C. and maintained at this temperature for 2 hours. The autoclave was cooled to an ambient temperature. The hydrogen was then vented and the autoclave was subsequently purged three times with nitrogen. The Pd/C was removed by filtration through Celite®. The crude product 2-pentyl-cyclopentanone (520 g) was obtained and used in following steps without further purification.

후처리

  1. customThe autoclave was purged three times with nitrogen
  2. customto exotherm to about 120° C.
  3. temperaturemaintained at this temperature for 2 hours
  4. customthe autoclave was subsequently purged three times with nitrogen
  5. customThe Pd/C was removed by filtration through Celite®

출처 및 근거

ORD 기록
ord-9986c0b391c34fe0b8074cb4cb3520ee
출처 데이터셋
uspto-grants-2016_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09290718B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트