홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Bis(eta-cyclopentadienyl) iron → HCID 178460911, 화합물

HRID 962953
인쇄

반응식

HRID 962953 반응식
[CH-:1]1[CH:5]=[CH:4][CH:3]=[CH:2]1.[CH-:6]1[CH:10]=[CH:9][CH:8]=[CH:7]1.[Fe+2:11].C([CH2:15][SiH:16]([Cl:18])[Cl:17])C=C>>[Cl:17][Si:16]([Cl:18])([CH3:15])[CH2:7][CH:6]([C-:1]1[CH:5]=[CH:4][CH:3]=[CH:2]1)[CH3:10].[CH-:6]1[CH:10]=[CH:9][CH:8]=[CH:7]1.[Fe+2:11]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 7611Bis(eta-cyclopentadienyl) ironHCID 57372819But-3-enyl(dichloro)silane

생성물 1

HCID 178460911HCID 178460911, 화합물수율 21%

실험 절차

In the same apparatus and procedures as EXAMPLE 1, 0.60 g (3.22 mmol) of ferrocene was reacted with 1.00 g (6.44 mmol) of allylmethyldichlorosilane under dry nitrogen atmospheric pressure for 2 hrs. After the addition of the catalyst solution, the reaction mixture was stirred for 2 hrs to complete the alkylation. The solvent was distilled at atmospheric pressure and the products were then extracted with 20.0 mL of hexane. Vacuum distillation of the reaction products at 180° C. and at 0.5 torr, produced (3,3-dichloro-1-methyl-3-silabutyl)ferrocene [yield: 21% (based on the reacted ferrocene), bp:(104°-110° C./0.5 torr)]. By vacuum distillation of the remaining products at 300° C. and at 0.5 torr, bis(3,3-dichloro-1-methyl-3-silabutyl)ferrocene as a mixture of isomers(m=1, n=1, yield; 7%, bp; 165°-170° C./0.5 torr) was obtained.

후처리

  1. additionAfter the addition of the catalyst solution
  2. distillationThe solvent was distilled at atmospheric pressure
  3. extractionthe products were then extracted with 20.0 mL of hexane
  4. distillationVacuum distillation of the reaction products at 180° C.

출처 및 근거

ORD 기록
ord-c47a53a85be4442595026714a96a7700
출처 데이터셋
uspto-grants-1998_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05760263

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트