홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethyl Carbonate → Methyl 4-(4-Benzyloxyphenoxy)-3-oxopentanoate

HRID 986485
인쇄

반응식

HRID 986485 반응식
[CH2:1]([O:8][C:9]1[CH:20]=[CH:19][C:12]([O:13][CH:14]([CH3:18])[C:15](=[O:17])[CH3:16])=[CH:11][CH:10]=1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[C:21](=O)([O:24]C)[O:22][CH3:23].C[O-].[Na+]>CO>[CH2:1]([O:8][C:9]1[CH:10]=[CH:11][C:12]([O:13][CH:14]([CH3:18])[C:15](=[O:17])[CH2:16][C:21]([O:22][CH3:23])=[O:24])=[CH:19][CH:20]=1)[C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 12021Dimethyl CarbonateHCID 10942334Sodium Methoxide2회HCID 140932993-[4-(Benzyloxy)phenoxy]butan-2-one

생성물 1

HCID 14093300Methyl 4-(4-Benzyloxyphenoxy)-3-oxopentanoate수율 94.7%

시약·촉매·용매 1

HCID 887Methanol용매2회

반응 조건

온도
90 °C

실험 절차

Into a 25 ml, three-necked round-bottom flask fitted with a thermometer, vigreux column, distillation head, magnetic stirrer, syringe pump and nitrogen sweep was charged 5.0 g of 3-(4-benzyloxyphenoxy)-2-butanone and 10 g of dimethyl carbonate, and the solution heated to 90° C. Thereafter, 2.0 ml sodium methoxide in methanol was added over a period of 50 minutes via a syringe pump. At the end of this addition, the reaction mixture was of a thick, cloudy orange consistency. It was then stirred for 40 minutes and charged with another 2.7 ml of sodium methoxide in methanol over a period of 30 minutes while distilling over methanol. At the end of the addition, the solution was very thick, and another 5 ml of dimethylcarbonate was added to improve the stirring capabilities. The solution was then removed from the heat, cooled to room temperature, and allowed to set for one hour. After this time, it was reheated to reflux temperature, and another 1.1 ml of sodium methoxide in methanol was charged over a period of 13 minutes. Fifteen minutes after the addition, the heat was removed, and the solution cooled to room temperature. The solution was then stripped to remove dimethyl carbonate and then mixed with 50 ml of ethyl acetate, 50 ml of ice water and 5 ml of acetic acid. The resulting mixture was shaken and separated and the organic phase was washed with 50 ml of water, and dried over magnesium sulfate. The solution was then filtered and stripped on an aspirator, yielding 5.75 g of a dark brown oil which was identified as being the subject compound by suitable analysis.

후처리

  1. customInto a 25 ml, three-necked round-bottom flask fitted with a thermometer, vigreux column, distillation head, magnetic stirrer, syringe pump and nitrogen sweep
  2. additionAt the end of this addition
  3. distillationwhile distilling over methanol
  4. additionAt the end of the addition
  5. additionanother 5 ml of dimethylcarbonate was added
  6. customThe solution was then removed from the heat
  7. temperaturecooled to room temperature
  8. waitto set for one hour
  9. temperatureto reflux temperature
  10. additionanother 1.1 ml of sodium methoxide in methanol was charged over a period of 13 minutes
  11. additionFifteen minutes after the addition
  12. customthe heat was removed
  13. temperaturethe solution cooled to room temperature
  14. customto remove dimethyl carbonate
  15. additionmixed with 50 ml of ethyl acetate, 50 ml of ice water and 5 ml of acetic acid
  16. stirringThe resulting mixture was shaken
  17. customseparated
  18. washthe organic phase was washed with 50 ml of water
  19. dry with materialdried over magnesium sulfate
  20. filtrationThe solution was then filtered

출처 및 근거

ORD 기록
ord-de73d20a84d44d73aa5c1a3f39a87736
출처 데이터셋
uspto-grants-1987_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04713471

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트