홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4-Fluoroaniline → Picolinafen

HRID 988838
인쇄

반응식

HRID 988838 반응식
Cl[C:2]1[CH:7]=[CH:6][CH:5]=[C:4]([O:8][C:9]2[CH:14]=[CH:13][CH:12]=[C:11]([C:15]([F:18])([F:17])[F:16])[CH:10]=2)[N:3]=1.[F:19][C:20]1[CH:26]=[CH:25][C:23]([NH2:24])=[CH:22][CH:21]=1.[C:27](=O)([O-])[O-:28].[Na+].[Na+].C1(P(C2C=CC=CC=2)CCCCP(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1>C1(C)C(C)=CC=CC=1.[Pd]>[F:19][C:20]1[CH:26]=[CH:25][C:23]([NH:24][C:27]([C:2]2[CH:7]=[CH:6][CH:5]=[C:4]([O:8][C:9]3[CH:14]=[CH:13][CH:12]=[C:11]([C:15]([F:18])([F:17])[F:16])[CH:10]=3)[N:3]=2)=[O:28])=[CH:22][CH:21]=1.[F:18][C:15]([F:16])([F:17])[C:11]1[CH:10]=[C:9]([CH:14]=[CH:13][CH:12]=1)[O:8][C:4]1[CH:5]=[CH:6][CH:7]=[CH:2][N:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 97314-FluoroanilineHCID 10340Sodium CarbonateHCID 821241,4-Bis(diphenylphosphino)butaneHCID 110111722-Chloro-6-[3-(trifluoromethyl)phenoxy]pyridine

생성물 2

HCID 3294375Picolinafen수율 92.1%HCID 225955262-{3-(Trifluoromethyl)phenoxy}pyridine
수율 2.9%

시약·촉매·용매 2

HCID 23938Palladium촉매HCID 7237O-Xylene용매

반응 조건

온도
200 °C

실험 절차

6.84 g (25 mmol) of 2-chloro-6-[3-(trifluoromethyl)phenoxy]pyridine (content 99.5 percent prepared according to Example 1), 4.17 g (37.5 mmol) of 4-fluoroaniline, 2.92 g (27.5 mmol) of sodium carbonate, 0.27 g (0.25 mmol) of palladium/activated charcoal (10 percent Pd) and 0.32 g (0.75 mmol) of 1,4-bis(diphenylphosphino)butane (IV, n=4, R8=R9=R10=R11=phenyl) in 25 ml of xylene were placed in an autoclave at room temperature. The autoclave was flushed with inert gas, carbon monoxide was then introduced under a pressure of 5 bar and the temperature was raised to 200° C. The CO pressure was increased to 14.5 bar and the mixture was stirred for 16 hours at 200° C. After cooling to room temperature and depressurization, the reaction mixture was treated with 50 ml of xylene and 50 ml of water and filtered. The aqueous phase was extracted with 25 ml of xylene and the combined organic phases were washed with 30 ml of water. The composition of the dissolved products was determined by GC. 92.1 percent of the title compound (amide), 1.9 percent of educt and 6.0 percent of by-products (3.1 percent of secondary amine formed by direct substitution of Cl by the aniline, and 2.9 percent of 2-[3-(trifluoromethyl)phenoxy]pyridine formed by hydrogenolysis) were found. After distillation of the solvent, the crude product (8.63 g) was obtained in the form of a yellow solid. The crude product was purified by recrystallization from methylcyclohexane. the yield of the title compound product was 6.3 g (67 percent) of colorless crystals. The melting point of the product was 104° to 105° C. Other data concerning the title compound was:

후처리

  1. customwere placed in an autoclave at room temperature
  2. customThe autoclave was flushed with inert gas, carbon monoxide
  3. additionwas then introduced under a pressure of 5 bar
  4. temperatureThe CO pressure was increased to 14.5 bar
  5. temperatureAfter cooling to room temperature
  6. additiondepressurization, the reaction mixture was treated with 50 ml of xylene and 50 ml of water
  7. filtrationfiltered
  8. extractionThe aqueous phase was extracted with 25 ml of xylene
  9. washthe combined organic phases were washed with 30 ml of water

출처 및 근거

ORD 기록
ord-54ae5f2484be4f76a32c5d0646be1e69
출처 데이터셋
uspto-grants-2003_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06635766B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트