홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 4-Sulfamoylbenzene-1-sulfonyl chloride

HRID 989250
인쇄

반응식

HRID 989250 반응식
[ClH:1].N[C:3]1[CH:8]=[CH:7][C:6]([S:9]([NH2:12])(=[O:11])=[O:10])=[CH:5][CH:4]=1.N([O-])=O.[Na+].[S:17](=[O:19])=[O:18]>O>[S:9]([C:6]1[CH:7]=[CH:8][C:3]([S:17]([Cl:1])(=[O:19])=[O:18])=[CH:4][CH:5]=1)(=[O:11])(=[O:10])[NH2:12]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 1119Sulfur DioxideHCID 5333SulfanilamideHCID 23668193Sodium Nitrite

생성물 1

HCID 109561594-Sulfamoylbenzene-1-sulfonyl chloride

시약·촉매·용매 1

HCID 962Water용매

실험 절차

To a mixed solution of 80 ml water and 50 ml of concentrated hydrochloric acid was added 25.0 g (145 mmol) of 4-aminobenzenesulfonamide followed by stirring. An aqueous solution (20 ml) of 10.5 g (152 mmol) of sodium nitrite was added dropwise thereinto at −13° C. to −10° C. during 15 min. After 10 min, the reaction solution was added to a mixed solution saturated with sulfur dioxide (prepared by saturating sulfur dioxide in a mixed solution of 150 ml of acetic acid and 12.5 ml of concentrated hydrochloric acid followed by adding 3.7 g of cuprous chloride) at −30° C. under stirring. After 1 hr, 500 ml of ice water was added to the reaction solution, and the resulting precipitates were collected by filtration. The precipitates were dissolved in a mixed solution of 450 ml of toluene and 150 ml of ethyl acetate. After the resulting insoluble matters were filtered off, the filtrate was extracted with ethyl acetate. The organic layer was washed with a saturated sodium bicarbonate solution and brine successively, and dried over magnesium sulfate. The solvent was evaporated, 100 ml of toluene was added to the resulting residue and the crystals were collected by filtration to give 20.9 g of the title compound.

후처리

  1. waitAfter 10 min
  2. customprepared
  3. concentrationby saturating sulfur dioxide in a mixed solution of 150 ml of acetic acid and 12.5 ml of concentrated hydrochloric acid
  4. additionby adding 3.7 g of cuprous chloride) at −30° C.
  5. stirringunder stirring
  6. waitAfter 1 hr
  7. addition500 ml of ice water was added to the reaction solution
  8. customthe resulting precipitates
  9. filtrationwere collected by filtration
  10. dissolutionThe precipitates were dissolved in a mixed solution of 450 ml of toluene and 150 ml of ethyl acetate
  11. filtrationAfter the resulting insoluble matters were filtered off
  12. extractionthe filtrate was extracted with ethyl acetate
  13. washThe organic layer was washed with a saturated sodium bicarbonate solution and brine successively
  14. dry with materialdried over magnesium sulfate
  15. customThe solvent was evaporated
  16. addition100 ml of toluene was added to the resulting residue
  17. filtrationthe crystals were collected by filtration

출처 및 근거

ORD 기록
ord-fcfd2dbe2f1b4488afb9a15544322b6c
출처 데이터셋
uspto-grants-2003_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06638964B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트