反应详情

33.2 g (0.1 mol) of 2-(2'-hydroxy-3'-t-butyl-5'-methylphenyl)-5-chlorobenzotriazole-N-oxide, 0.125 g of palladium carbon, 300 ml of a solvent mixture comprising toluene, butanol and water (ratio by volume of 1:1:1) and 5 g 50% dimethylamine were charged into a 500-ml stainless autoclave equipped with an agitator. After the air in the autoclave had been replaced by hydrogen, the pressure of hydrogen was set to 10 kg/cm2. The temperature of the resultant mixture was increased to 50° C. under agitation, and agitation was continued until no more hydrogen gas was absorbed by the mixture. The pressure of hydrogen was always kept at 8 to 10 kg/cm2 during the reaction. After the reaction had been completed, the autoclave was cooled, and the catalyst was filtered off. The most part of solvent was distilled off, and the residual solid was washed with isopropyl alcohol and then dried to obtain 27.2 g of 2-(2'-hydroxy-3'-t-butyl- 5'-methylphenyl)-5-chlorobenzotriazole as a target substance (yield, 86.2%; melting point, 138° to 140° C.).

1. additionwere charged into a 500-ml stainless autoclave
2. customequipped with an agitator
3. customwas absorbed by the mixture
4. customThe pressure of hydrogen was always kept at 8 to 10 kg/cm2 during the reaction
5. temperaturethe autoclave was cooled
6. filtrationthe catalyst was filtered off
7. distillationThe most part of solvent was distilled off
8. washthe residual solid was washed with isopropyl alcohol
9. customdried