HRID1059131

反应详情

EQUATION

反应方程式

HRID 1059131 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

CONDITIONS

反应条件

温度
60 °C

PROCEDURE

实验过程

4-(4′-Chlorophenoxy)phenyl sulfonyl chloride (3.0 kg), 3, was dissolved in three liters of toluene and the solution was added dropwise, with stirring, to 3.6 kg of trimethyl phosphite which had been preheated to 60° C. The reaction was exothermic and the reaction was allowed to heat to 80°-90° C. during the addition. Thin layer chromatography indicated a mixture of the desired thioether and two baseline products. The mixture was refluxed until the pot temperature rose to ˜130° C. The mixture was cooled to ˜60° C. and 1 liter of methanol was added. Potassium hydroxide solution (4.5 kg of 45% aqueous solution) was added dropwise, slowly, with rapid stirring to the reaction mixture. The addition was very exothermic and the pot temperature was controlled to 65°-80° C. The mixture was then refluxed for 2 hrs. More toluene (6 liters) was added and the mixture cooled to ˜60° C. The lower aqueous layer was separated and the organic layer washed with 3 liters of water. The organic layer was stripped to a low volume and 9 liters of isopropanol charged to the hot mixture. The solution was distilled until ˜3.5 liters of distillate had been collected. The mixture was held at 45° C. for several hours and was then cooled to ˜−10° C. and stirred several hours. The white, crystalline product was collected, washed with cold isopropanol and dried to yield 1.9 kg of 4-(4′-chlorophenoxy)phenyl methyl sulfide, 4.

WORKUP

后处理

  1. additionthe solution was added dropwise
  2. customhad been preheated to 60° C
  3. temperatureto heat to 80°-90° C. during the addition
  4. temperatureThe mixture was refluxed until the pot temperature
  5. customrose to ˜130° C
  6. additionThe addition
  7. customwas controlled to 65°-80° C
  8. temperatureThe mixture was then refluxed for 2 hrs
  9. temperaturethe mixture cooled to ˜60° C
  10. customThe lower aqueous layer was separated
  11. washthe organic layer washed with 3 liters of water
  12. additioncharged to the hot mixture
  13. distillationThe solution was distilled until ˜3.5 liters of distillate
  14. customhad been collected
  15. waitThe mixture was held at 45° C. for several hours
  16. temperaturewas then cooled to ˜−10° C.
  17. stirringstirred several hours
  18. customThe white, crystalline product was collected
  19. washwashed with cold isopropanol
  20. customdried