HRID1105931

反应详情

EQUATION

反应方程式

HRID 1105931 的结构方程式

PROCEDURE

实验过程

p-(1,1-Dimethyl-2-hydroxyethyl)bromobenzene, 148 g, 0.646 mole, was added to a 1 L flask fitted with a reflux condenser, magnetic stirrer and oil bath. Dimethylformamide, 350 mL, and cuprous cyanide, 69.4 g, 0.775 mole were then added to the flask. The heterogeneous mixture was heated to gentle reflux whereupon it became somewhat more homogeneous and would then easily stir. The mixture was heated at reflux for five hours. While still hot the mixture was cast into 1 L of water using 100 mL of hot DMF for washing out the flask. The precipitated residue was stirred by hand as well as possible, allowed to settle and the greater portion of the water decanted and discarded. A freshly prepared solution of ferric chloride, 340 g; conc. HCl, 85 mL; water, 510 mL was added to the residue to destroy copper complexes. The mixture was heated with good stirring at 60° to 70° C. for 20 to 30 minutes. The crude nitrile was then extracted with three 200 mL portions of benzene. The benzene extracts were combined and dried over anhydrous K2CO3 for 1/2 hour. Benzene was removed in a rotoevaporator to give a yellowish oil which crystallized easily when cooled to room temperature and scratched. The yield was about 102 g (90%), mp=70°-82° C.

WORKUP

后处理

  1. customfitted with a reflux condenser, magnetic stirrer and oil bath
  2. temperatureThe heterogeneous mixture was heated
  3. temperatureto gentle reflux whereupon it
  4. temperatureThe mixture was heated
  5. temperatureat reflux for five hours
  6. washfor washing out the flask
  7. stirringThe precipitated residue was stirred by hand as well as possible,
  8. customthe greater portion of the water decanted
  9. additionwater, 510 mL was added to the residue
  10. customto destroy copper complexes
  11. temperatureThe mixture was heated
  12. stirringwith good stirring at 60° to 70° C. for 20 to 30 minutes
  13. extractionThe crude nitrile was then extracted with three 200 mL portions of benzene
  14. dry with materialdried over anhydrous K2CO3 for 1/2 hour
  15. customBenzene was removed in a rotoevaporator
  16. customto give a yellowish oil which
  17. customcrystallized easily when