反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
CONDITIONS
反应条件
- 温度
- 160 °C
PROCEDURE
实验过程
To a 100 ml, 3-necked flask equipped with a thermometer and a Dean-Stark trap was added 3.52 gm (16.1 mmol) of 4,4'-difluorobenzophenone, 4.0 gm (21.5 mmol) of 4,4'-dihydroxybiphenyl, and 40 ml of dimethylacetamide (DMAC). After flushing the mixture for 30 minutes with dry nitrogen, 5.0 gm (36.2 mmol) of pulverized anhydrous potassium carbonate was added with stirring. The reaction content was stirred at 90° C. for 1 hour. Toluene was added to the Dean-Stark trap and to the reaction vessel (4 ml). The reaction mixture was refluxed at 145°-150° C. for 10 hours. Water which formed as a by-product was removed by azeotropic distillation. The toluene was removed by distillation while heating to 160° C. Upon cooling to ambient condition, 1.86 gm (10.7 mmol) of 4-nitrophthalonitrile was added. The reaction mixture turned purple. The reaction content was then stirred at the ambient temperature for 2 hours and at 90° C. for 6 hours. The reaction was monitored by FTIR spectroscopy and showed the complete disappearance of the absorptions attributed to the nitro and hydroxyl groups. The room temperature mixture was poured into 200 ml of water with stirring. The solid precipitate was collected by suction filtration, washed exhaustively with water, and dried to afford 7.8 gm of oligomeric phthalonitrile monomer.
WORKUP
后处理
- customTo a 100 ml, 3-necked flask equipped with a thermometer
- additionwas added
- stirringThe reaction content was stirred at 90° C. for 1 hour
- temperatureThe reaction mixture was refluxed at 145°-150° C. for 10 hours
- customwas removed by azeotropic distillation
- customThe toluene was removed by distillation
- additionwas added
- stirringThe reaction content was then stirred at the ambient temperature for 2 hours and at 90° C. for 6 hours
- stirringwith stirring
- filtrationThe solid precipitate was collected by suction filtration
- washwashed exhaustively with water
- customdried