反应详情

温度

148 °C

To a one liter roundbottom flask equipped with a mechanical stirrer and a thermometer was added 104.5 grams (0.3 mole—1.0 equiv.) of 88.7% pure 1-(5-amino-2,4-dichlorophenyl)-4,5-dihydro-4-difluoromethyl-3-methyl-1,2,4-triazol-5(1H)-one, 52.6 grams (0.45 mole—1.5 equiv.) of methanesulfonyl chloride, 0.9 gram (0.012 mole—0.04 equiv.) of DMF, and 93 grams of toluene (% wt/wt. triazol-5(1H)-one to solvent—112%). Upon completion of addition, the reaction mixture was heated at about 148° C. for four hours. After this time, the reaction mixture was cooled to 95° C. and an additional 569 grams of toluene (% wt/wt. triazol-5(1H)-one to total solvent—15.8%) was added. Upon completion of addition, the reaction mixture was allowed to cool to ambient temperature and then stirred for about 18 hours. After this time, the reaction mixture was heated to 60° C. and then transferred to a second one-liter roundbottom flask equipped with a mechanical stirrer and a thermometer. Once the transfer was complete, the solution was heated to 85° C. and 490 mL of warm (85° C.) water were added. The resulting mixture was heated to 85° C. and stirred for 30 minutes. After this time, the organic layer was separated from the aqueous layer and an additional 490 mL of warm (85° C.) water was added. The resulting mixture was again heated to 85° C. and stirred for an additional 30 minutes. The organic layer was separated from the aqueous layer and allowed to cool to ambient temperature, and then stirred for about 48 hours. After this time, the reaction mixture was heated to 90° C. to effect dissolution and then cooled to 85° C. and stirred for 30 minutes. After this time, the reaction mixture was cooled to 20° C. during an eight hour period at a rate of 5° C./hour drop in temperature for the first four hours and then at a rate of 10° C./hour for the last four hours. In order to facilitate crystallization, about one (1) gram (about 1 wt %) of technical N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-diyhdro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methane-sulfonamide was added at 70–75° C. during the eight hour cool down period. Once at the appropriate temperature, the organic layer was transferred into an appropriate centrifuge, where it was spun for 30 minutes to remove the mother liquor. The filter cake was washed with three 50 mL portions of cold toluene charged directly into the centrifuge. The mixture was spun for 30 minutes to remove the toluene wash. The filter cake was removed from the centrifuge and dried at 65° C./30 mm Hg for four hours, yielding 108.99 grams (85%) of 90.5% pure N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methanesulfonamide.

1. customTo a one liter roundbottom flask equipped with a mechanical stirrer
2. additionUpon completion of addition
3. temperatureAfter this time, the reaction mixture was cooled to 95° C.
4. additionUpon completion of addition
5. temperatureto cool to ambient temperature
6. temperatureAfter this time, the reaction mixture was heated to 60° C.
7. customequipped with a mechanical stirrer
8. temperaturethe solution was heated to 85° C.
9. additionwere added
10. temperatureThe resulting mixture was heated to 85° C.
11. stirringstirred for 30 minutes
12. customAfter this time, the organic layer was separated from the aqueous layer
13. temperaturean additional 490 mL of warm (85° C.) water
14. additionwas added
15. temperatureThe resulting mixture was again heated to 85° C.
16. stirringstirred for an additional 30 minutes
17. customThe organic layer was separated from the aqueous layer
18. temperatureto cool to ambient temperature
19. stirringstirred for about 48 hours
20. temperatureAfter this time, the reaction mixture was heated to 90° C.
21. dissolutiondissolution
22. temperaturecooled to 85° C.
23. stirringstirred for 30 minutes
24. temperatureAfter this time, the reaction mixture was cooled to 20° C. during an eight hour period at a rate of 5° C./hour drop in temperature for the first four hours
25. customfor the last four hours
26. customcrystallization
27. additionabout one (1) gram (about 1 wt %) of technical N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-diyhdro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methane-sulfonamide was added at 70–75° C. during the eight hour
28. temperaturecool down period
29. waitwas spun for 30 minutes
30. customto remove the mother liquor
31. washThe filter cake was washed with three 50 mL portions of cold toluene
32. additioncharged directly into the centrifuge
33. waitThe mixture was spun for 30 minutes
34. customto remove the toluene
35. washwash
36. customThe filter cake was removed from the centrifuge
37. customdried at 65° C./30 mm Hg for four hours