Methanaminium, N-((dimethylamino)(3H-1,2,3-triazolo(4,5-b)pyridin-3-yloxy)methylene)-N-methyl-, hexafluorophosphate(1-) (1:1) → HCID 59275561, compound

HRID 1671968Notes

Reaction equation

HRID 1671968 reaction equation
[Cl:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][C:3]=1[C:8]1[C:9]([C:34]([OH:36])=O)=[CH:10][C:11]([C:14]2[CH:15]=[CH:16][C:17]3[O:21][C:20]([C:22]4[CH:27]=[CH:26][C:25]([F:28])=[CH:24][CH:23]=4)=[C:19]([C:29](=[O:32])[NH:30][CH3:31])[C:18]=3[CH:33]=2)=[CH:12][CH:13]=1.[N:37]1[CH:42]=[CH:41][CH:40]=[CH:39][C:38]=1[C:43]1([NH2:46])[CH2:45][CH2:44]1.CN(C(ON1N=NC2C=CC=NC1=2)=[N+](C)C)C.F[P-](F)(F)(F)(F)F>CN(C=O)C>[Cl:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][C:3]=1[C:8]1[CH:13]=[CH:12][C:11]([C:14]2[CH:15]=[CH:16][C:17]3[O:21][C:20]([C:22]4[CH:23]=[CH:24][C:25]([F:28])=[CH:26][CH:27]=4)=[C:19]([C:29]([NH:30][CH3:31])=[O:32])[C:18]=3[CH:33]=2)=[CH:10][C:9]=1[C:34](=[O:36])[NH:46][C:43]1([C:38]2[CH:39]=[CH:40][CH:41]=[CH:42][N:37]=2)[CH2:45][CH2:44]1

Participants

5

Reactant 3

HCID 9886157Methanaminium, N-((dimethylamino)(3H-1,2,3-triazolo(4,5-b)pyridin-3-yloxy)methylene)-N-methyl-, hexafluorophosphate(1-) (1:1)2×HCID 111054091-(Pyridin-2-yl)cyclopropanamineHCID 59275615HCID 59275615, compound

Product 1

HCID 59275561HCID 59275561, compoundYield 83.6%

Reagents, catalysts & solvents 1

HCID 6228DimethylformamideSolvent

Procedure

To a 25 mL flask was added 2′-chloro-4-(2-(4-fluorophenyl)-3-(methylcarbamoyl) benzofuran-5-yl)biphenyl-2-carboxylic acid (39.6 mg, 0.079 mmol), DMF (2 mL), N-ethyl-N,N-isopropylpropan-2-amine (0.055 mL, 0.317 mmol), 1-(pyridin-2-yl) cyclopropanamine (15.94 mg, 0.119 mmol), and finally HATU (2-(3H-[1,2,3]triazolo[4,5-b]pyridin-3-yl)-1,1,3,3-tetramethylisouronium hexafluorophosphate (V), (120 mg, 0.317 mmol). The flask was sealed and the mixture stirred over night at room temperature. The crude product was purified using a Shimadzu preparative HPLC employing acetonitrile/water/trifluoroacetic acid where solvent A was 10% acetonitrile/90% water/0.1% trifluoroacetic acid and solvent B was 10% water/90% acetonitrile/0.1% trifluoroacetic acid with a Waters Sunfire 5 μm C18 19×150 mm column at a gradient of 20-100% B and a flow rate of 25 mL/min. over 20 minutes with a 10 minute hold. Solvent was removed giving 40.7 mgs (70% yield) of 5-(2′-chloro-2-(1-(pyridin-2-yl)cyclopropylcarbamoyl)biphenyl-4-yl)-2-(4-fluorophenyl)-N-methylbenzofuran-3-carboxamide as a white solid. The LC/MS data was obtained on a Shimadzu analytical LC/Micromass Platform LC (ESI+) at 220 nm using the following set of conditions: Phenomenex Luna 3 μm C18, 2×50 mm column, with a gradient of 0-100% B (B=90% HPLC grade acetonitrile/0.1% trifluoroacetic acid/10% HPLC grade water), (A=90% HPLC grade water/0.1% trifluoroacetic acid/10% HPLC grade acetonitrile), in 4 minutes with a 1 minute hold at a rate of 0.8 mL/minute. HPLC purity was determined using a Shimadzu analytical LC at 254 nm and 256 nm with a Waters Sunfire C18 3.5 μm 4.6×150 mm column employing water/acetonitrile/0.1% trifluoroacetic acid with a gradient of 10-100% B (B=95% HPLC grade acetonitrile/0.1% trifluoroacetic acid/5% HPLC grade water), (A=95% HPLC grade water/0.1% trifluoroacetic acid/5% HPLC grade acetonitrile), in 10 minutes with a 10 minute hold at a rate of 1 mL/minute. The HPLC purity was then confirmed with an orthogonal solvent system and column using a Shimadzu analytical LC with a Waters XBridge Phenyl C18 3.5 μm 4.6×150 mm column employing water/methanol/10 mM ammonium bicarbonate with a gradient of 10-100% B (B=95% HPLC grade methanol/10 mM ammonium bicarbonate/5% HPLC grade water), (A=95% HPLC grade water/10 mM ammonium bicarbonate/5% HPLC grade methanol), in 10 minutes with a 10 minute hold at a rate of 1 mL/minute. 1H NMR (400 MHz, THF-d8) δ ppm 0.90-1.10 (m, 2H), 1.42-1.53 (m, 2H), 2.94 (d, J=4.52 Hz, 3H), 7.11 (dd, J=6.90, 5.40 Hz, 1H), 7.18-7.27 (m, 2H), 7.30-7.43 (m, 5H), 7.44-7.49 (m, 1H), 7.52-7.58 (m, 1H), 7.59-7.67 (m, 2 H), 7.73 (dd, J=8.53, 1.76 Hz, 1H), 7.81 (dd, J=7.78, 2.01 Hz, 1H), 7.95-8.01 (m, 2H), 8.06 (d, J=1.51 Hz, 1H), 8.09-8.17 (m, 2H), 8.41 (d, J=4.02 Hz, 1H). LCMS m/z 617.3 (M+H), Rt=2.765 min. HPLC (Sunfire C18) Rt=7.823 min, 100% purity and (XBridge Phenyl C18) Rt=11.871 min., 99.8% purity.

Workup

  1. customThe flask was sealed
  2. customThe crude product was purified
  3. customSolvent was removed

Sources & evidence

ORD record
ord-d5ac2df03b7f4a6eab9aa9ed20a5f4db
Source dataset
uspto-grants-2011_08
Patent number
US07994171B2

Reaction notes

Loading…