HRID1688241

反应详情

EQUATION

反应方程式

HRID 1688241 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

3

CONDITIONS

反应条件

温度
85 °C

PROCEDURE

实验过程

To a 250 mL sealed tube was added 2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl trifluoromethanesulfonate (3.55 g, 8.5 mmol), dioxane (50 mL), water (10 mL), Tetrakis(triphenylphosphine)palladium(0) (0.196 g, 0.170 mmol), 3-borono-4-chlorobenzoic acid (2.55 g, 12.75 mmol), and cesium carbonate (4.15 g, 12.75 mmol). The tube was sealed and heated in an oil bath overnight at 85° C. The reaction mixture was then cooled, diluted with 300 mL of cold 0.5M HCl and stirred for 30 minutes. The resulting solid was washed with 0.5 N HCl then with water and allowed to dry under vacuum giving a quantitative yield of 4-Chloro-5-(2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl)benzoic acid which was used without further purification. The LC/MS data was obtained on a Shimadzu analytical LC/Micromass Platform LC (ESI+) at 220 nm using the following set of conditions: Waters Sunfire 5 μm C18, 4.6×50 mm column, with a gradient of 0-100% B (B=90% HPLC grade acetonitrile/0.1% trifluoroacetic acid/10% HPLC grade water), (A=90% HPLC grade water/0.1% trifluoroacetic acid/10% HPLC grade acetonitrile), in 3 minutes with a 1 minute hold at a rate of 4 mL/minute. HPLC purity was determined using a Shimadzu analytical LC at 220 nm and 256 nm with a Waters Sunfire C18 3.5 μm 4.6×150 mm column employing water/acetonitrile/0.1% TFA with a gradient of 10-100% B (B=95% HPLC grade acetonitrile/0.1% trifluoroacetic acid/5% HPLC grade water), (A=95% HPLC grade water/0.1% trifluoroacetic acid/5% HPLC grade acetonitrile), in 10 minutes with a 10 minute hold at a rate of 1 mL/minute. The HPLC purity was then confirmed with an orthogonal solvent system and column using a Shimadzu analytical LC with a Waters XBridge Phenyl C18 3.5 μm 4.6×150 mm column employing water/methanol/10 mM ammonium bicarbonate with a gradient of 10-100% B (B=95% HPLC grade methanol/10 mM ammonium bicarbonate/5% HPLC grade water), (A=95% HPLC grade water/10 mM ammonium bicarbonate/5% HPLC grade methanol), in 10 minutes with a 10 minute hold at a rate of 1 mL/minute. 1H NMR (500 MHz, DMF-d7) δ ppm 2.95 (d, J=4.58 Hz, 3H), 7.39-7.47 (m, 2H), 7.57 (dd, J=8.55, 1.83 Hz, 1H), 7.81 (dd, J=15.72, 8.39 Hz, 2H), 7.87 (d, J=1.83 Hz, 1H), 8.04-8.14 (m, 4H), 8.40 (d, J=4.58 Hz, 1H). LCMS m/z 424.90 (M+H), Rt 2.287 min. HPLC Rt 9.749 min. (Sunfire C18) and 10.518 min. (XBridge Phenyl C18), 94% purity.

WORKUP

后处理

  1. customTo a 250 mL sealed tube
  2. customThe tube was sealed
  3. temperatureThe reaction mixture was then cooled
  4. washThe resulting solid was washed with 0.5 N HCl
  5. customto dry under vacuum