反应详情

The new chemical compound is produced by: (1) slowly adding 0.33 kg of calcium carbonate in increments of 0.1 kg to 0.87 kg of phytic acid liquid; (2) heating and refluxing for one hour at 90 degrees Celsius; (3) separating the two solids by filtration; (4) gathering the white solid, which is calcium phytate; (5) dissolving 1 kg of calcium phytate into 2.0 liters of water; (6) heating to 89 degrees Celsius for 10–15 minutes until calcium phytate is dissolved in solution; (7) adding and stirring 0.90 kg of citric acid to solution until dissolved in solution; (8) removing heat source and setting solution in a refrigerated environment at a temperature of 5–10 degrees Celsius allowing crystallization for approximately 6 to 8 hours or until crystallization has ceased; (9) allowing the mixture to dry out at room temperature (75 degrees Celsius) until no liquid is visible, and (10) spreading crystals into a drying pan for approximately 24 hours at a temperature of no more than 40 degrees Celsius yielding approximately 1.2 kg of hexa-citrated phytate.

1. temperaturerefluxing for one hour at 90 degrees Celsius
2. custom(3) separating the two solids
3. filtrationby filtration
4. dissolution(5) dissolving 1 kg of calcium phytate into 2.0 liters of water
5. temperature(6) heating to 89 degrees Celsius for 10–15 minutes until calcium phytate
6. dissolutionis dissolved in solution
7. addition(7) adding
8. dissolutionuntil dissolved in solution
9. custom(8) removing
10. temperatureheat source
11. customat a temperature of 5–10 degrees Celsius
12. customcrystallization for approximately 6 to 8 hours
13. customuntil crystallization
14. customto dry out at room temperature (75 degrees Celsius) until no liquid
15. customfor approximately 24 hours
16. customat a temperature of no more than 40 degrees Celsius