HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 1744179Generated: October 30, 2026
Epichlorohydrin → 9-Ethyl-3-carbazolecarbaldehyde n-2,3-epoxypropyl-n-phenylhydrazone
https://huagongshe.com/reaction/1744179
Participants
| Role | Name | HCID | Charge |
|---|
| Reactant | Epichlorohydrin | HCID 7835 | — |
| Reactant | Potassium Hydroxide | HCID 14797 | — |
| Reactant | Sodium Sulfate | HCID 24436 | — |
| Reactant | 9-ethylcarbazol 3-carbazolecarboxaldehyde-N-phenylhydrazone | HCID 131725385 | — |
| Catalyst | Sodium Sulfate | HCID 24436 | — |
| Product | 9-Ethyl-3-carbazolecarbaldehyde n-2,3-epoxypropyl-n-phenylhydrazone | HCID 73176556 | 78.5% |
Reaction Steps
A mixture of potassium hydroxide powder (KOH, 85%, 198 g, 3 mol,) and anhydrous sodium sulfate (Na2SO4, 51 g, 0.369 mol) was added in three stages to a mixture of 9-ethylcarbazol-3-carbazolecarboxaldehyde-N-phenylhydrazone (313.4 g, 1 mol) and epichlorohydrin (1.5 mol), while keeping the reaction mixture at 20–25° C.: stage quantities added were 33 g of Na2SO4 and 66 g of KOH initially; 9.9 g of Na2SO4 and 66 g of KOH after 1 hour of reaction; and 9.9 g of Na2SO4 and 66 g of KOH after 2 hours of reaction. The reaction mixture was stirred vigorously at 35–40 ° C. until the starting hydrazone disappeared (approximately 3–4 hours). Subsequently, the mixture was cooled to room temperature and any remaining solids were removed by filtration. The liquid organic phase was treated with diethyl ether and washed with distilled water until the washed water was of a neutral pH. The organic layer was dried over anhydrous magnesium sulfate, treated with activated charcoal, and filtered. The solvent and excess epichlorohydrin were removed by evaporation in a rotory evaporator. The residue was recrystallized from a mixture of toluene and 2-propanol in a 1:1 ratio by volume. The crystals formed upon standing were filtered off and washed with 2-propanol to give 290 g of product (78.5% yield). The melting point was found to be 136–137° C. (recrystallized from toluene). The 1H NMR spectrum (250 MHz) of the product in CDCl3 was characterized by the following chemical shifts (δ, ppm): 8.35 (s, 1H, 4-HHt); 8.14 (d, J=7.8 Hz, 1H, 1-HHt); 7.93 (d, J=7.6 Hz, 1H, 2-HHt); 7.90 (s, 1H, CH═N); 7.54–7.20 (m, 8H, Ph, Ht); 6.96 (t, J=7.2 Hz, 1H, 4-HPh); 4.37 (m, 3H, CH2CH3, one of the NCH2 protons); 4.04 (dd, J1=4.3 Hz, J2=16.4 Hz, 1H, next of the NCH2 protons); 3.32 (m, 1H, CH); 2.88 (dd, 1H, part of the ABX system, cis-HA of CH2O, JAX=2.6 Hz, JAB=4.9 Hz); 2.69 (dd, 1H, part of the ABX system, trans-HB of CH2O, JBX=4.0 Hz); and 1.44 (t, J=7.2 Hz, 3H, CH3). An elemental analysis yielded the following results in weight percent C, 78.32; H, 6.41; and N, 11.55; which compared with calculated values for C24H23N3O in weight percent of C, 78.02; H, 6.28; and N, 11.37.
Provenance & Evidence
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| Patent number | US07014968B2 |
|---|
| Source dataset | uspto-grants-2006_03 |
|---|
| ORD ID | ord-cbfec5c5b409446198557012faef94e7 |
|---|
| Source note | uspto-grants-2006_03 |
|---|