HRID1875542

反应详情

EQUATION

反应方程式

HRID 1875542 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

3

CONDITIONS

反应条件

温度
80 °C

PROCEDURE

实验过程

A 72 L reactor equipped with reflux condenser, sparging tube, bubbler, and temperature probe was charged with 6-fluoropyridin-3-ylboric acid (2.84 kg, 1.24 equiv.), 4-(2-(4-bromophenoxy)ethyl)morpholine (4.27 kg, 1.0 equiv.), and DME (27 L). Agitation was started and sodium carbonate (4.74 kg, 3.0 equiv.) as a solution in DI water (17.1 L) was then charged to the reaction mixture. Argon was bubbled through the reaction mixture for 50 minutes. Under an argon atmosphere, tetrakis(triphenylphosphine)palladium (750 g, 0.04 equiv.) was added to the reaction mixture as a slurry in DME (1.0 L). The reaction mixture was heated to 75-85° C. and stirred overnight (17 h). The reaction mixture was cooled to between 18-22° C. DI water (26.681 kg) and MTBE (26.681 L) were charged to the reactor and stirred for 5 minutes. The phases were separated and the aqueous phase was extracted with MTBE (2×26.7 L). The combined organics were extracted with 2M HCl (1×15.0 L, 3×21.8 L). The aqueous phase was then charged back to the reactor and ethyl acetate was added (26.7 L). The pH was adjusted to 6.2 using 6 M sodium hydroxide (26.7 L) while maintaining a temperature between 15-25° C. The phases were separated and the aqueous phase was extracted with ethyl acetate (2×26.7 L). The combined organics were dried with magnesium sulfate and concentrated to give 4555 g of a residue (101% crude yield, 67.1% AUC by HPLC).

WORKUP

后处理

  1. customA 72 L reactor equipped
  2. temperaturewith reflux condenser
  3. customsparging tube
  4. customArgon was bubbled through the reaction mixture for 50 minutes
  5. temperatureThe reaction mixture was cooled to between 18-22° C
  6. stirringstirred for 5 minutes
  7. customThe phases were separated
  8. extractionthe aqueous phase was extracted with MTBE (2×26.7 L)
  9. extractionThe combined organics were extracted with 2M HCl (1×15.0 L, 3×21.8 L)
  10. additionThe aqueous phase was then charged back to the reactor and ethyl acetate
  11. additionwas added (26.7 L)
  12. temperaturewhile maintaining a temperature between 15-25° C
  13. customThe phases were separated
  14. extractionthe aqueous phase was extracted with ethyl acetate (2×26.7 L)
  15. dry with materialThe combined organics were dried with magnesium sulfate
  16. concentrationconcentrated