反应详情

温度

85 °C

Alternative Procedure: To a 150 mL sealed tube was added 2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl trifluoromethanesulfonate (1.0 g, 2.4 mmol), dioxane (14.4 mL), water (2.9 mL), tetrakis(triphenyl phosphine)palladium(0) (0.055 g, 0.048 mmol), 5-borono-2-chlorobenzoic acid (0.720 g, 3.59 mmol), and cesium carbonate (1.171 g, 3.59 mmol). The tube was sealed and heated in an oil bath overnight at 85° C. The reaction mixture was cooled, diluted with 150 mL of ethyl acetate, washed sequentially with 20 mL of 0.5M HCl then brine. The product solution was filtered through a plug of celite then evaporated to dryness. The resulting solid was taken up in 10 mL of 1:1 DMF and acetonitrile and purified using a Shimadzu preparative HPLC employing acetonitrile/water/trifluoroacetic acid where solvent A was 10% acetonitrile/90% water/0.1% trifluoroacetic acid and solvent B was 10% water/90% acetonitrile/0.1% trifluoroacetic acid with a Waters Sunfire 3.5 μm C18 4.6×150 mm column at a gradient of 50-100% B and a flow rate of 40 mL/min. over 20 minutes with a 5 minute hold. Solvent was evaporated giving 319.5 mgs (32% yield) of 2-chloro-5-(2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl)benzoic acid as a white powder. The LC/MS data was obtained on a Shimadzu analytical LC/Micromass Platform LC (ESI+) at 220 nm using the following set of conditions: Phenomenex Luna 10 μm C18, 3.0×50 mm column, with a gradient of 0-100% B (B=90% HPLC grade methanol/0.1% trifluoroacetic acid/10% HPLC grade water), (A=90% HPLC grade water/0.1% trifluoroacetic acid/10% HPLC grade methanol), in 4 minutes with a 1 minute hold at a rate of 5 mL/minute. 1H NMR (400 MHz, DMSO-d6) δ ppm 2.83-2.91 (m, 3H), 7.35-7.45 (m, 2H), 7.65 (d, J=8.53 Hz, 1H), 7.69-7.75 (m, 1H), 7.76-7.82 (m, 1H), 7.85-7.93 (m, 2H), 7.98-8.05 (m, 2H), 8.08 (d, J=2.26 Hz, 1H), 8.43-8.53 (m, 1H), 13.50 (br. s., 1H). LCMS m/z 424.0 (M+H), Rt=3.105 min., 100% purity.

1. customAlternative Procedure: To a 150 mL sealed tube
2. customThe tube was sealed
3. temperatureThe reaction mixture was cooled
4. washwashed sequentially with 20 mL of 0.5M HCl
5. filtrationThe product solution was filtered through a plug of celite
6. customthen evaporated to dryness
7. customacetonitrile and purified
8. customSolvent was evaporated