反应详情

温度

230 °C

To a 1 liter stirred reactor, equipped with a distillation column, condenser, and graduated receiver, the following constituents were added: 261.2 g of diisopropanol amine (DIPA) and 432.0 g (98%) of methyl laurate. The contents were heated slowly to 230° C. under a nitrogen blanket. After 5.5 hours, 57 ml of methanol (0.72 equivalent) had come overhead. The pressure was then slowly lowered to strip out unreacted DIPA. At a batch temperature of 180° C. and a pressure of 293 Pa, a cut consisting of 79.7 g of DIPA and 87.8 g of methyl laurate was removed. The batch temperature was then raised to 200° C. and the pressure dropped to 267 Pa. During this period, a cut of 140.9 g of the amide acetal was recovered. This represents a 35.7% conversion of the methyl laurate to amide acetal.

1. customequipped with a distillation column, condenser
2. additionthe following constituents were added
3. customAt a batch temperature of 180° C.
4. customwas removed
5. temperatureThe batch temperature was then raised to 200° C.
6. additionthe pressure dropped to 267 Pa
7. waitDuring this period
8. customa cut of 140.9 g of the amide acetal was recovered