Dimethyl Sulfoxide → 3[o-(2-Propenyl)phenoxy]propyl trimethoxysilane

関与物質

反応条件

反応手順

Using the general procedure described in Example 1 a reactor was charged with 73.7 g (0.55 mole) of o-allylphenol, 43.28 g of a 50% by weight aqueous solution of sodium hydroxide (0.54 mole NaOH), 112 cc dimethylsulfoxide and 120 cc toluene. The resultant mixture was heated to the boiling point for six hours under a nitrogen atmosphere to remove all of the water present by azeotropic distillation. The reaction mixture was then allowdd to cool to about 75° C., at which time 109 g (0.56 mole) of 3-chloropropyl trimethoxysilane was added dropwise while the reaction mixture was stirred. Following completion of the addition the reaction mixture was heated at 115° C. for about 16 hours, following which the mixture was allowed to cool and was filtered to remove any solid material. The solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C. The pressure was then reduced to 2 mm of mercury and the material boiling at 146° C. was collected. The weight of this fraction was equivalent to a yield of 90% based on starting materials. Analysis by vapor phase chromatography indicated that the purity of the product was greater than 98%. The infrared and nuclear magnetic resonance spectra of the product were consistent with the proposed structure.

情報源と証拠