反应详情

温度

-30 °C

Into a 300 ml four-neck flask, 10.0 g (75.8 mmol) of cis-(±)-1,2-epoxyindan (VI), 50 ml of acetonitrile, and 40 ml of dichloromethane were introduced. This mixture was cooled to -30° C. in a dry ice/acetone bath. To this mixture, 11.14 g (113.6 mmol) of 100% sulfuric acid (prepared from 97% sulfuric acid and fuming sulfuric acid) was dropwise added at -30° to -27° C. in a period of 1 hour. When left for 1 hour to return to room temperature, the mixture became white and turbid to form a slurry. An HPLC analysis of the contents revealed that 46.8% of cis-oxazoline derivative (IV: R=CH3) had been generated. No cis-amide derivative (III: R=CH3) was detected. As the mixture was heated while 72 ml of water being added thereto, 100 ml of an azeotrope of acetonitrile/dichloromethane/water was distilled off in a period of 1 hour. The remaining mixture was cooled to room temperature, washed twice with 100 ml of dichloromethane, and then subjected to liquid separation. The water phase was adjusted to a strongly alkali state by an addition of 25% sodium hydroxide. The crystal deposited thereby was filtered off under reduced pressure, washed with water, and then dried to yield 7.53 g (yield: 66.8%) of cis-(±)-1-aminoindan-2-ol (V) as a white crystal. Its purity determined by an HPLC was 95.5%.

1. customto return to room temperature
2. customto form a slurry
3. additionadded
4. distillation100 ml of an azeotrope of acetonitrile/dichloromethane/water was distilled off in a period of 1 hour
5. temperatureThe remaining mixture was cooled to room temperature
6. washwashed twice with 100 ml of dichloromethane
7. customsubjected to liquid separation
8. additionThe water phase was adjusted to a strongly alkali state by an addition of 25% sodium hydroxide
9. filtrationThe crystal deposited thereby was filtered off under reduced pressure
10. washwashed with water
11. customdried