HRID33788

反应详情

EQUATION

反应方程式

HRID 33788 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

3

CONDITIONS

反应条件

温度
120 °C

PROCEDURE

实验过程

A solution of 1-chloro-4-nitrobenzene (476 g, 3.02 mol) in chlorosulfonic acid (1 litre) was stirred and heated at 120° C. for 22 hours. The reaction was cooled to room temperature and was poured slowly with stirring onto ice (10 litres). The resulting dark brown precipitate was filtered, pressed dry, dried in a vacuum desiccators over night and was used without any further purification (770 g). The resulting 2-chloro-5-nitro-benzenesulfonyl chloride was suspended in water and cooled to 0° C. (ice bath). Sodium sulphite (1.9 Kg, 15 mol) was added to the stirred solution by portion (100 g portion and in a manner that the temperature remains under 25° C.). After the addition the mixture was allowed to warm back to room temperature and left stirring for one hour. During that time the pH of the solution was kept at pH 7-8 (Whattman pH paper) by addition of 8 M solution of sodium hydroxide (400 ml). The solution was then diluted with water (6 L) and sodium hydroxide was added to it (8 M, 0.5 L). The resulting mixture was filtered through a sintered funnel (number 3). The filtrate was cooled to 0° C. (ice bath) and acidify with concentrated HCl to pH<1. The brown solution then turn green and a silvery green plates precipitate. The solid was filtered, pressed dry and dried in a vacuum desiccator to give the title compound (213 g, 32%).

WORKUP

后处理

  1. temperatureThe reaction was cooled to room temperature
  2. additionwas poured slowly
  3. filtrationThe resulting dark brown precipitate was filtered
  4. custompressed dry
  5. customdried in a vacuum desiccators over night
  6. customwas used without any further purification (770 g)
  7. temperaturecooled to 0° C. (ice bath)
  8. customremains under 25° C.
  9. additionAfter the addition the mixture
  10. temperatureto warm back to room temperature
  11. waitleft
  12. stirringstirring for one hour
  13. additionwas added to it (8 M, 0.5 L)
  14. filtrationThe resulting mixture was filtered through a sintered funnel (number 3)
  15. temperatureThe filtrate was cooled to 0° C. (ice bath)
  16. filtrationThe solid was filtered
  17. custompressed dry
  18. customdried in a vacuum desiccator