HRID360028

反应详情

EQUATION

反应方程式

HRID 360028 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

2

CONDITIONS

反应条件

温度
0 °C

PROCEDURE

实验过程

(±)-cis-6-(cyanomethyl)-2,2-dimethyl-1,3-dioxane-4-acetic acid (3.72 g, 17.44 mmol) is dissolved in 20 mL of dichloromethane, cooled to 0° C. and 0.2 g of 4-dimethylaminopyridine (DMAP) is added, followed by t-butyl alcohol and followed by 4.32 g of dicyclohexylcarbodiimide (DCC). This solution is allowed to slowly warm to room temperature over a 76.5-hour period. Thin layer chromotography (TLC) shows mainly product, and some slightly lower Rf by-products. The mixture is stirred one hour and 50 mL of dichloromethane is added and stirring continues five hours. An additional 100 mL of diethyl ether is added and the mixture filtered. The precipitate is washed with diethyl ether. The filtrate is concentrated to an oil. The crude product is chromatographed on silica gel eluting with 4:1 hexane:ethyl acetate. The eluate is concentrated to yield (±)-cis-1,1-dimethylethyl 6-(cyanomethyl)-2,2-dimethyl-1,3-dioxane-4-acetate.

WORKUP

后处理

  1. temperatureto slowly warm to room temperature over a 76.5-hour period
  2. stirringstirring
  3. waitcontinues five hours
  4. filtrationthe mixture filtered
  5. washThe precipitate is washed with diethyl ether
  6. concentrationThe filtrate is concentrated to an oil
  7. customThe crude product is chromatographed on silica gel eluting with 4:1 hexane
  8. concentrationThe eluate is concentrated