Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 458298Generated: October 30, 2026

Heptane → HCID 86601560, compound

https://huagongshe.com/reaction/458298

Reaction equation

Participants

RoleNameHCIDCharge
ReactantHeptaneHCID 8900—
ReactantTrifluoromethanesulfonic acidHCID 62406—
ReactantHCID 86601559HCID 86601559—
SolventWaterHCID 962—
SolventAcetonitrileHCID 6342—
ProductHCID 86601560HCID 86601560—

Reaction Conditions

Temperature37 °C

Reaction Steps

A suspension of the product of Example 61 c) (4573 g, 7.47 mol) in acetonitrile (4 L) was added to a 50 L reactor equipped with a thermocouple and nitrogen inlet. An additional 13 L of acetonitrile was added and the suspension was heated to 37° C. with steam. A solution of triflic acid (1253 mL, 14.16 mol) in water (7.6 L) was added over 20 minutes. Then the mixture was stirred at 39–42° C. for 1 hour. The reaction mixture was quenched by adding it to 20 L of 23% aqueous sodium bicarbonate solution and 35 L of methyl t-butyl ether. The reaction flask was rinsed with 5 L of methyl t-butyl ether and an additional 20 L of 23% aqueous sodium bicarbonate was addded. This mixture was stirred for 10 minutes and the layers were separated. The organic layer was washed with a mixture of 25 L of 23% aqueous sodium bicarbonate solution and 15 L of 7% NaCl solution. Then the organic layer was washed with 25 L of 7% NaCl solution. The solvents were removed on a batch concentrator to provide a thick slurry. Heptane (32 L) was added to the slurry and then evaporated. Additional heptane (12 L) was added and evaporated. A further amount of heptane (40 L) was added and the suspensin was heated to 44° C. in 60 minutes, causing complete dissolution. The reaction flask was cooled to 40° C. in 10 minutes by running cold water over the surface of the flask. The solution was then allowed to slowly cool to 35° C., where cyrstallization occurs. The resulting thick mixture was stirred for 14 hours. The precipitate was filtered and rinsed twice with 4 L of heptane and then dried on the filter funnel for 2 hours and then in a vacuum oven with nitrogen purge for 60 hours at room temperature. The resulting solid (3200 g), heptane (30 L) and methyl t-butyl ether (1.6 L) were combined and heated with stirring to dissolution. The resulting solution was cooled over 1 hour to 42° C. and the resulting suspension was stirred for 20 hours while cooling to room temperature. The precipitate was filtered and dried in a vacuum oven with nitrogen purge for 20 hours at room temperature to give the desired product (2860 g).

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS07189849B2
Source datasetuspto-grants-2007_03
ORD IDord-5f5355deb4cf49b58146a4d7f2342fce
Source noteuspto-grants-2007_03