HRID461805

反应详情

EQUATION

反应方程式

HRID 461805 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

CONDITIONS

反应条件

温度
-10 °C

PROCEDURE

实验过程

A solution of 5-aminoisoquinoline (14.4 g.) in pyridine (40 cc.) is added dropwise to a solution of triethylamine (10.1 g.) and carbon disulphide (40 cc.) in pyridine (20 cc.), whilst stirring at a temperature of about -10° C. After 1 hour at this temperature, a solution of N,N'-dicyclohexylcarbodiimide (20.6 g.) in pyridine (20 cc.) is added dropwise. Stirring is continued for 3 hours at a temperature changing from -10° to 20° C . and then for 20 hours at a temperature of about 20° C. The N,N'-dicyclohexylthiourea formed is filtered off and washed with methylene chloride (50 cc.); the filtrate is evaporated to dryness under reduced pressure (20 mm. Hg) at 40° C. The solid residue is taken up in methylene chloride (100 cc.); the new insoluble material is filtered off and washed with methylene chloride (30 cc.); the filtrate is evaporated to dryness under reduced pressure (20 mm. Hg) at 40° C. The residue is dissolved in boiling acetonitrile (100 cc.); after cooling, the crystals formed are filtered off and then suspended in diisopropyl ether (180 cc.). After 30 minutes'stirring at a temperature of about 20° C, the insoluble material is filtered off. The filtrate is evaporated to dryness under reduced pressure (20 mm. Hg) at 50° C. The residue is crystalline beige solid (5.9 g.) consisting of 5-isothiocyanatoisoquinoline, melting at 99° C. after recrystallisation from acetonitrile (40 cc.) and at 102° C. after sublimation at 70° C under reduced pressure (1 mm. Hg).

WORKUP

后处理

  1. stirringStirring
  2. waitis continued for 3 hours at a temperature
  3. customchanging from -10° to 20° C
  4. waitand then for 20 hours at a temperature of about 20° C