HRID598048

反应详情

EQUATION

反应方程式

HRID 598048 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

2

CONDITIONS

反应条件

温度
45 °C

PROCEDURE

实验过程

To a mixture of methanol (2.50 l) and water (250 ml) was charged 4,5,6,7 -tetrahydro-thieno[3,2-c]pyridine hydrochloride (500 g; 2.85 mol) with stirring. After stirring for 10 minutes, sodium cyanide (153.0 g; 3.12 mol) was added and stirred further for 40 minutes. 2-Chlorobenzaldehyde (392.1 g; 2.79 mol) was added slowly to this reaction mixture between 23-28° C. over a period of 1.5 hours. After the addition was over, the flask was heated in an oil bath between 40-50° C. and maintained at this temperature for 4.5 hours. After cooling the reaction mixture to 25-30° C., 5% sodium metabisulfite solution (250 ml) was added and stirred for 1 hour at this temperature range. To the resulting slurry, water (7.5 l) was added and stirred for 1 hour at 25-30° C. The off-white solid thus formed was filtered, washed with a 1:1 mixture of methanol: water (2.5 l) and the wet cake was dried at 75° C. under vacuum (pressure: −0.8 kg/cm2) for 10 hours to obtain the product as an off-white solid. Yield: 719.0 g (87.4%). mp: 124-126.5° C. The product was identified by IR spectrum, 1H and 13C NMR investigation.

WORKUP

后处理

  1. stirringAfter stirring for 10 minutes
  2. stirringstirred further for 40 minutes
  3. additionAfter the addition
  4. temperaturemaintained at this temperature for 4.5 hours
  5. temperatureAfter cooling the reaction mixture to 25-30° C.
  6. stirringstirred for 1 hour at this temperature range
  7. stirringstirred for 1 hour at 25-30° C
  8. customThe off-white solid thus formed
  9. filtrationwas filtered
  10. washwashed with a 1:1 mixture of methanol
  11. dry with materialwater (2.5 l) and the wet cake was dried at 75° C. under vacuum (pressure: −0.8 kg/cm2) for 10 hours