反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
CONDITIONS
反应条件
- 温度
- 50 °C
PROCEDURE
实验过程
A one liter, four neck round bottom flask was equipped with an overhead stirrer, reflux condenser, thermocouple temperature read out, and heating mantle. The following reaction was run under a dry nitrogen atmosphere. Isopropanol (400 mL) and 4-[(4-chloro-2-hydroxy-benzoyl)amino]butanoic acid (25.0 g, 0.09 mol) were charged to the reactor and stirring was started. The reaction slurry was heated to 50° C. until a hazy brown solution was obtained. The warm solution was filtered through a warm pressure filter dressed with Whatman #1 paper into a clean 1 L reactor. The clear yellow filtrate was heated to 62° C. while stirring. Sodium hydroxide solution (50% aqueous; 7.2 g, 0.09 mol) was charged to the reactor while maintaining vigorous agitation. After the base addition was complete, the reactor was heated to reflux (72° C.) and then allowed to cool slowly to ambient temperature. The product was isolated by vacuum filtration through a sintered glass funnel and vacuum dried at 50° C. for 24 hours to give 23.16 g of sodium 4-[(2-hydroxybenzoyl)amino]butanoate as an off-white solid. The yield was 92%.
WORKUP
后处理
- customA one liter, four neck round bottom flask was equipped with an overhead stirrer
- temperaturereflux condenser
- temperatureheating mantle
- customThe following reaction
- customwas obtained
- filtrationThe warm solution was filtered through a warm pressure
- filtrationfilter
- customdressed with Whatman #1 paper into a clean 1 L reactor
- temperatureThe clear yellow filtrate was heated to 62° C.
- stirringwhile stirring
- temperaturewhile maintaining vigorous agitation
- additionAfter the base addition
- temperaturethe reactor was heated
- temperatureto reflux (72° C.)
- temperatureto cool slowly to ambient temperature
- customThe product was isolated by vacuum filtration through a sintered glass funnel
- customvacuum dried at 50° C. for 24 hours