HRID980774

反应详情

EQUATION

反应方程式

HRID 980774 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

PROCEDURE

实验过程

70.0 kg of 3-amino-1-hydroxypropane-1,1-diphosphonic acid are suspended while stirring in 140 liters of demineralised water. The suspension is heated to 65°-70° and 59.9 liters (79.5 kg) of 30% aqueous sodium hydroxide solution are added at such a rate that the temperature of the reaction mixture rises to approximately 85° with the formation of a clear solution. The pH value of the solution should be between 7.2 and 7.5. It can be finely adjusted if necessary by the addition of small amounts of 30% sodium hydroxide solution or of 3-amino-1-hydroxypropane-1,1-diphosphonic acid. The solution is cleared by filtering through a filter that is coated with a small quantity of diatomaceous earth and has been preheated to 75°-80° into a vessel preheated to the same temperature. The solution is inoculated, and, while stirring, cooled in the course of 2 hours to 20°-25°, 70 liters of 96% ethanol are added in the course of a further 2 hours while stirring, the mixture is then cooled to 0°-5° in the course of 1 hour and the reaction is completed by stirring at this temperature for at least 1 hour. The mother liquor is then centrifuged off and the residue is washed in portions with a mixture of 25 liters of ethanol and 45 liters of demineralised water. The whole is centrifuged thoroughly and dried in a vacuum cabinet at 35°-40° until the weight is constant (approximately 24 hours). Disodium 3-amino-1-hydroxypropane-1,1-diphosphonate is obtained in the novel crystal form containing water of crystallisation (modification E), the IR spectrum of which is identical to that of the product obtained according to Example 1.

WORKUP

后处理

  1. temperatureThe suspension is heated to 65°-70°
  2. customrises to approximately 85° with the formation of a clear solution
  3. filtrationby filtering through
  4. filtrationa filter that
  5. customhas been preheated to 75°-80° into a vessel
  6. temperaturecooled in the course of 2 hours to 20°-25°
  7. addition70 liters of 96% ethanol are added in the course of a further 2 hours
  8. stirringwhile stirring
  9. temperaturethe mixture is then cooled to 0°-5° in the course of 1 hour
  10. stirringby stirring at this temperature for at least 1 hour
  11. washthe residue is washed in portions with a mixture of 25 liters of ethanol and 45 liters of demineralised water
  12. customdried in a vacuum cabinet at 35°-40° until the weight
  13. custom(approximately 24 hours)