HRID986074

反应详情

EQUATION

反应方程式

HRID 986074 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

CONDITIONS

反应条件

温度
115 °C

PROCEDURE

实验过程

In a 3-neck, 300 ml round bottom flask equipped with reflux condenser, nitrogen inlet, mechanical stirrer and pressure-equalizing dropping funnel were combined 58.8 g (0.60 mole) maleic anhydride, 14.6 g di-t-butyl peroxide, 115 g methyl isobutyl ketone and 3.4 g (0.040 mole) glacial methacrylic acid. The system was purged with nitrogen and then heated to reflux under a static positive nitrogen pressure. A small amount of solids momentarily precipitated and then redissolved at about 100° C. When the reaction mixture reached reflux (about 115° C.), the remaining 31.0 g (0.36 mole) methacrylic acid in 60 g of methyl isobutyl ketone was added continuously over a 3-hour period. The reaction solution was refluxed for 15 minutes following the addition, 150 g of water was then added, and the ketone-water mixture refluxed for an additional hour. The isolation procedure of Example 4 was followed to produce a 57 weight percent aqueous solution of homogeneous hydrolyzed methacrylate/maleate copolymer of weight average molecular weight of 3390 and number average molecular weight of 610 in 98 weight percent yield.

WORKUP

后处理

  1. customIn a 3-neck, 300 ml round bottom flask equipped
  2. temperaturewith reflux condenser, nitrogen inlet, mechanical stirrer
  3. customThe system was purged with nitrogen
  4. temperatureheated
  5. temperatureto reflux under a static positive nitrogen pressure
  6. customA small amount of solids momentarily precipitated
  7. dissolutionredissolved at about 100° C
  8. temperatureThe reaction solution was refluxed for 15 minutes
  9. additionwas then added