化工社
首页MCP工作台Skills
首页工作台通知我的
llms.txt · MCP 指南隐私政策 · 服务条款 · 支持v1.8.3
  1. 首页
  2. /反应

碘 → (E)-3-cyclopentyl-2-iodo-acrylic acid methyl ester

HRID 841237
打印

反应方程式

HRID 841237 反应方程式
[Cl-].[Li+].[Cu](C#N)C#N.[CH:8]1([Mg]Cl)[CH2:12][CH2:11][CH2:10][CH2:9]1.C(OCC)C.[C:20]([O:24][CH3:25])(=[O:23])[C:21]#[CH:22].[I:26]I>O1CCCC1>[CH3:25][O:24][C:20](=[O:23])/[C:21](/[I:26])=[CH:22]\[CH:8]1[CH2:12][CH2:11][CH2:10][CH2:9]1
参与物反应条件实验过程后处理来源与证据反应笔记

参与物

8

反应物 6

HCID 807碘2 次HCID 3283乙醚HCID 13536丙炔酸甲酯HCID 433294Lithium ChlorideHCID 178418260HCID 178418260,化合物HCID 178478989HCID 178478989,化合物

产物 1

HCID 86584747(E)-3-cyclopentyl-2-iodo-acrylic acid methyl ester
收率 97%

试剂、催化剂与溶剂 1

HCID 8028四氢呋喃溶剂2 次

反应条件

温度
25 °C

实验过程

A mixture of lithium chloride (8.48 g, 209 mmol, predried at 130° C. under high vacuum for 3 h) and copper cyanide (8.96 g, 100 mmol) in dry tetrahydrofuran (100 mL) was stirred at 25° C. under argon for 10 min to obtain a clear solution. The reaction mixture was then cooled to −70° C. and then slowly treated with a 2.0M solution of cyclopentylmagnesium chloride in diethyl ether (55 mL, 110 mmol). After the addition, the reaction mixture was allowed to warm to −30° C. where it was stirred for 5 min. The resulting reaction mixture was again cooled back to −70° C. and then slowly treated with methyl propiolate (7.99 g, 95 mmol). The reaction mixture was stirred overnight at −60° C. to −50° C. The reaction mixture was then slowly treated with a solution of iodine (34.3 g, 135 mmol) in dry tetrahydrofuran (30 mL), with the temperature kept at −70° C. to −60° C. After addition of the iodine solution, the cooling bath was removed, and the reaction mixture was allowed to warm to 25° C. where it was stirred for 2 h. The reaction mixture was then poured into a solution consisting of a saturated aqueous ammonium chloride solution (200 mL) and ammonium hydroxide (50 mL), and the organic compound was extracted into diethyl ether (3×100 mL). The combined organic extracts were successively washed with a saturated aqueous sodium thiosulfate solution (1×300 mL) and a saturated aqueous sodium chloride solution (1×300 mL). The organic layer was then dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. Flash chromatography (Merck Silica gel 60, 230-400 mesh, 20/1 hexanes/diethyl ether) afforded (E)-3-cyclopentyl-2-iodo-acrylic acid methyl ester (25.8 g, 97%) as a yellow oil: EI-HRMS m/e calcd for C9H13IO2 (M+) 279.9960, found 279.9961.

后处理

  1. customto obtain a clear solution
  2. temperatureThe reaction mixture was then cooled to −70° C.
  3. additionAfter the addition
  4. temperatureto warm to −30° C. where it
  5. stirringwas stirred for 5 min
  6. customThe resulting reaction mixture
  7. temperaturewas again cooled back to −70° C.
  8. stirringThe reaction mixture was stirred overnight at −60° C. to −50° C
  9. customkept at −70° C. to −60° C
  10. customthe cooling bath was removed
  11. temperatureto warm to 25° C. where it
  12. stirringwas stirred for 2 h
  13. additionThe reaction mixture was then poured into a solution
  14. extractionthe organic compound was extracted into diethyl ether (3×100 mL)
  15. washThe combined organic extracts were successively washed with a saturated aqueous sodium thiosulfate solution (1×300 mL)
  16. dry with materialThe organic layer was then dried over anhydrous magnesium sulfate
  17. filtrationfiltered
  18. concentrationconcentrated in vacuo

来源与证据

ORD记录
ord-25115a1f96f94553a6ca4d43ac7ce5fd
来源数据集
uspto-grants-2002_04
DOI
10.6084/m9.figshare.5104873.v1
专利号
US06369232B1

反应笔记

本页导航参与物反应条件实验过程后处理来源与证据反应笔记