化工社
首页MCP工作台Skills
首页工作台通知我的
llms.txt · MCP 指南隐私政策 · 服务条款 · 支持v1.8.3
  1. 首页
  2. /反应

甲基丙烯酸甲酯 → Butyl Acrylate

HRID 854591
打印

反应方程式

HRID 854591 反应方程式
C(OC)(=O)C(C)=C.[Na].S([CH:13]([CH2:25]C(OCCCCCCCC)=O)[C:14]([O:16][CH2:17][CH2:18][CH2:19][CH2:20]CCCC)=[O:15])(O)(=O)=O.[Al]>>[C:14]([O:16][CH2:17][CH2:18][CH2:19][CH3:20])(=[O:15])[CH:13]=[CH2:25]
参与物实验过程后处理来源与证据反应笔记

参与物

4

反应物 3

HCID 6658甲基丙烯酸甲酯HCID 5359268铝HCID 53249634磺化琥珀酸二辛酯钠盐

产物 1

HCID 8846Butyl Acrylate

实验过程

Using the emulsion polymerization process described above for the two stage copolymer, a two stage copolymer composed of methyl methacrylate: butyl acrylate ratio of 60:40 was synthesized to yield a polymer latex with 204 nm average particles (no clay). The emulsifier used in the polymerization process was 1.28% of a 75% solution of dioctyl sulfosuccinate sodium salt. The total solids content of the emulsion was 48.55 weight percent. A portion of the emulsion was coated onto a 0.002 cm thick aluminum sheet to yield a 0.069 cm thick film. The entire arrangement of film and substrate was dried overnight in a vacuum oven at 75° C. After drying a disk of surface area 2.7318 cm2 was cut from the laminate and evaluated, by dielectric relaxation spectroscopy., for assessment of the magnitude of the dielectric storage factor. The data listed in TABLE VI, reveal the value of the dielectric storage factor. A list of the mechanical properties are given in TABLE VII.

后处理

  1. customthe emulsion polymerization process
  2. customto yield a polymer latex with 204 nm average particles (no clay)
  3. customto yield a 0.069 cm thick film
  4. customThe entire arrangement of film and substrate was dried overnight in a vacuum oven at 75° C
  5. customAfter drying a disk of surface area 2.7318 cm2

来源与证据

ORD记录
ord-d3d40b1e38a643e5a88c0df992ce7946
来源数据集
uspto-grants-2007_08
DOI
10.6084/m9.figshare.5104873.v1
专利号
US07259203B2

反应笔记

本页导航参与物实验过程后处理来源与证据反应笔记