StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Carbon Dioxide → Nickel tetracarbonyl

HRID 1423969
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1423969
[C]=O.[C:3](=O)=[O:4].[H][H].[Ni:8]>[Ni].O>[C-:3]#[O+:4].[C-:3]#[O+:4].[C-:3]#[O+:4].[C-:3]#[O+:4].[Ni:8]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 4

HCID 280Carbon DioxideHCID 935NickelHCID 178418361HCID 178418361, VerbindungHCID 178418416HCID 178418416, Verbindung

Produkt 1

HCID 26039Nickel tetracarbonyl

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 935NickelKatalysator
HCID 962
Water
Lösungsmittel
14×

Versuchsvorschrift

U.S. Pat. No. 4,431,751 describes a method for producing superheated steam with the heat of catalytic methanation of a synthesis gas containing carbon monoxide, carbon dioxide and hydrogen. The process passes a gas stream first through a first internally water-cooled reactor, subsequently through an adiabatic reactor and a subsequent heat exchanger and finally through a second internally water-cooled reactor. The internally water-cooled reactors comprise a cooling system disposed within a catalyst bed through which water flows. As catalyst a nickel-containing catalyst is used. Water is passed in succession, first through the cooling system of the second internally water-cooled reactor for preheating thereof to a temperature approximating the saturated steam temperature, thereafter into the first internally water-cooled reactor for conversion into saturated steam and subsequently to the heat exchanger following the adiabatic reactor for superheating. In the exemplified process the second internally water-cooled reactor is set to operate at a gas entrance temperature between 250° C. and 350° C., specifically 300° C., at an average pressure of 37.5 bar and the product gas flowing out of the second internally water-cooled reactor is 300° C. In the example the water is brought up to a pressure of 110 bar and preheated up to 160° C. before entering the cooling system of the second internally water-cooled reactor (the boiling temperature of water at 110 bars is about 318° C.). A disadvantage of the process of U.S. Pat. No. 4,431,751 is that the very low entrance temperature of the water in the second internally water-cooled reactor, especially in combination with the cooling system used, can lead to cold spots in the catalyst bed which are expected to result deactivation of the nickel catalyst due to the formation of nickel carbonyl. In addition the process of U.S. Pat. No. 4,431,751 requires an adiabatic reactor to allow the steam to become superheated.

Aufarbeitung

  1. customfor producing superheated steam with the
  2. temperatureheat of catalytic methanation of a synthesis gas
  3. temperaturecooled reactor
  4. temperaturecooled reactor
  5. customto operate at a gas entrance temperature between 250° C. and 350° C., specifically 300° C., at an average pressure of 37.5 bar
  6. temperaturecooled reactor
  7. customis 300° C
  8. custompreheated up to 160° C.
  9. customis about 318° C.
  10. temperaturecooled reactor

Quellen und Nachweise

ORD-Eintrag
ord-e99343d6fafc4673a66ad458e0d11f25
Quelldatensatz
uspto-grants-2015_01
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08927610B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion