StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Hydrochloric Acid → HCID 178492166, Verbindung

HRID 1811871
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1811871
[CH3:1][O:2][C:3]1[N:8]=[CH:7][C:6]([NH:9][C:10]2[C:17]([C:18]3[N:26]=[C:25]([CH3:27])[N:24]=[C:23]4[C:19]=3[N:20]=[CH:21][N:22]4C3CCCCO3)=[CH:16][C:13]([CH:14]=O)=[CH:12][N:11]=2)=[CH:5][CH:4]=1.[NH2:34][C:35]1[CH:36]=[N:37][CH:38]=[CH:39][CH:40]=1.[BH4-].[Na+].Cl>C(O)C.ClCCl.CO.C(O[Ti](OC(C)C)(OC(C)C)OC(C)C)(C)C>[CH3:1][O:2][C:3]1[N:8]=[CH:7][C:6]([NH:9][C:10]2[C:17]([C:18]3[N:26]=[C:25]([CH3:27])[N:24]=[C:23]4[C:19]=3[N:20]=[CH:21][NH:22]4)=[CH:16][C:13]([CH2:14][NH:34][C:35]3[CH:36]=[N:37][CH:38]=[CH:39][CH:40]=3)=[CH:12][N:11]=2)=[CH:5][CH:4]=1
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

9

Edukt 4

HCID 313Hydrochloric Acid2×HCID 100093-AminopyridineHCID 4311764Sodium borohydrideHCID 595483516-(6-Methoxypyridin-3-ylamino)-5-(2-methyl-9-(tetrahydro-2H-pyran-2-yl)-9H-purin-6-yl)nicotinaldehyde

Produkt 1

HCID 178492166HCID 178492166, VerbindungAusbeute 18,1 %

Reagenzien, Katalysatoren, Lösungsmittel

4
HCID 178460666HCID 178460666, VerbindungKatalysatorHCID 702EthanolLösungsmittelHCID 887MethanolLösungsmittel2×HCID 6344DichloromethaneLösungsmittel2×

Versuchsvorschrift

6-(6-methoxypyridin-3-ylamino)-5-(2-methyl-9-(tetrahydro-2H-pyran-2-yl)-9H-purin-6-yl)nicotinaldehyde (153.3 mg, 0.3441 mmol) was suspended in ethanol (3.0 mL) and dichloromethane (3.0 mL), 3-aminopyridine (65.9 mg, 0.700 mmol) and tetraisopropoxytitanium (0.15 mL, 0.51 mmol) were added. The flask was fitted with a reflux condenser and placed in a preheated oil bath (50° C.-60° C.) and stirred under nitrogen for 6 hours. Then, the reaction was cooled to room temperature and allowed to stir overnight. After stirring overnight, sodium borohydride (26.7 mg, 0.706 mmol) was added, and stirring was continued at room temperature. After 35 minutes, the reaction was treated with 5 N HCl (0.60 mL) added dropwise, as gas evolution occurs. The reaction was diluted with MeOH (about 1 mL, both before and after adding the HCl) and stirred at room temperature for 5 hours. Then, the reaction flask was fitted with a reflux condenser and put in an oil bath which was heated to 50° C. Stirring was continued at this temperature for 1 hour, and then the reaction was cooled to room temperature. The suspension was diluted with DCM and MeOH and filtered through a Celite® (diatomaceous earth) pad, which was washed with DCM and MeOH. The filtrate was concentrated and treated with water and filtered. The solid was collected and purified on HPLC (10% to 100% MeCN/water with 0.1% TFA over 30 minutes with a total flow rate of 100 mL/min) to give N-(6-methoxypyridin-3-yl)-3-(2-methyl-9H-purin-6-yl)-5-((pyridin-3-ylamino)methyl)pyridin-2-amine (27.3 mg, 18%). MS (ESI pos. ion) m/z 440 (M+H)+. 1H NMR (d6-DMSO, 400 MHz) δ 13.63 (br s, 1H), 12.59 (s, 1H), 9.79 (s, 1H), 8.57 (s, 1H), 8.54 (d, J=2.74 Hz, 1H), 8.35 (d, J=2.35 Hz, 1H), 8.19-8.10 (m, 2H), 8.04 (d, J=1.56 Hz, 1H), 7.75-7.68 (m, 2H), 7.57 (br s, 1H), 6.85 (d, J=8.80 Hz, 1H), 4.45 (s, 2H), 3.85 (s, 3H), 2.85 (s, 3H).

Aufarbeitung

  1. customThe flask was fitted with a reflux condenser
  2. customplaced in a preheated oil bath
  3. stirringto stir overnight
  4. stirringAfter stirring overnight
  5. stirringstirring
  6. customwas continued at room temperature
  7. waitAfter 35 minutes
  8. additionadded dropwise, as gas evolution
  9. stirringstirred at room temperature for 5 hours
  10. customThen, the reaction flask was fitted with a reflux condenser
  11. customput in an oil bath
  12. temperaturewhich was heated to 50° C
  13. stirringStirring
  14. waitwas continued at this temperature for 1 hour
  15. temperaturethe reaction was cooled to room temperature
  16. filtrationfiltered through a Celite® (diatomaceous earth) pad, which
  17. washwas washed with DCM and MeOH
  18. concentrationThe filtrate was concentrated
  19. additiontreated with water
  20. filtrationfiltered
  21. customThe solid was collected
  22. custompurified on HPLC (10% to 100% MeCN/water with 0.1% TFA over 30 minutes with a total flow rate of 100 mL/min)

Quellen und Nachweise

ORD-Eintrag
ord-67ed188a53674930ab655a2032f1cefe
Quelldatensatz
uspto-grants-2013_01
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08362241B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion