StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Methyltrimethoxysilane → methyltrimethoxysilane KOH

HRID 1852308
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1852308
[CH3:1][Si:2]([O:7][CH3:8])([O:5][CH3:6])[O:3][CH3:4].[OH-:9].[K+:10]>O>[CH3:1][Si:2]([O:7][CH3:8])([O:5][CH3:6])[O:3][CH3:4].[OH-:9].[K+:10]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 2

HCID 14456MethyltrimethoxysilaneHCID 14797Potassium Hydroxide

Produkt 1

HCID 86686438methyltrimethoxysilane KOH

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 962WaterLösungsmittel4×

Versuchsvorschrift

A 500 ml 5-neck round-bottom flask rendered with nitrogen and equipped with paddle stirrer, dropping funnel, thermometer, and water separator with reflux condenser, is charged with 75 g (0.55 mol) of methyltrimethoxysilane (available commercially from Wacker Chemie AG) and with 65 g of Isopar E (isoparaffinic hydrocarbon mixture with a boiling rate of 113-143° C., available commercially from ExxonMobile). The water separator is filled with the brim with Isopar E. With stirring at 350 rpm, a solution of 30.9 g (0.47 mol) of potassium hydroxide (85% purity, available commercially from AppliChem) in 19.8 g of demineralized water is metered in over 10 minutes. During this addition, the reaction mixture warms up to 69° C. It is bought to boiling temperature by subsequent heating and the stirrer speed is reduced to 50 rpm. The distillate separates out at the lower phase in the water separator. Up to a boiling temperature of 121° C., 64.9 g of clear, colorless distillate are collected, which according to analysis by gas chromatography contains 83.3% methanol, 14.6% water, and 1.7% Isopar E. The hydrolysis of the methoxy radicals in the methyltrimethoxysilane, accordingly, is quantitative. During the distillation, a pasty white solids separates out in the reaction mixture, and increasingly breaks down into fine particles and forms a suspension. The suspension is filtered over a Beco KD3 filter plate in a suction filter, and nitrogen is passed through to constant weight. This gives 61.1 g of fine, white, free-flowing powder, with a solids content of 100% (determined using the HR73 Halogen Moisture Analyzer solids content balance from Mettler Toledo at 160° C.)

Aufarbeitung

  1. customA 500 ml 5-neck round-bottom flask rendered with nitrogen
  2. customequipped with paddle stirrer
  3. temperaturewith reflux condenser
  4. customis metered in over 10 minutes
  5. additionDuring this addition
  6. customwarms up to 69° C
  7. temperatureby subsequent heating
  8. distillationUp to a boiling temperature of 121° C., 64.9 g of clear, colorless distillate are collected
  9. customThe hydrolysis of the methoxy radicals in the methyltrimethoxysilane
  10. distillationDuring the distillation
  11. temperatureincreasingly
  12. filtrationThe suspension is filtered over a Beco
  13. filtrationKD3 filter plate in a suction
  14. filtrationfilter
  15. customat 160° C.

Quellen und Nachweise

ORD-Eintrag
ord-14e5a8949606406aaca8f6aa8ac819b1
Quelldatensatz
uspto-grants-2015_02
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08961672B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion