StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Methyltrimethoxysilane → methyltrimethoxysilane KOH

HRID 1852313
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1852313
[CH3:1][Si:2]([O:7][CH3:8])([O:5][CH3:6])[O:3][CH3:4].[OH-:9].[K+:10]>O>[CH3:1][Si:2]([O:7][CH3:8])([O:5][CH3:6])[O:3][CH3:4].[OH-:9].[K+:10]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 2

HCID 14456MethyltrimethoxysilaneHCID 14797Potassium Hydroxide

Produkt 1

HCID 86686438methyltrimethoxysilane KOH

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 962WaterLösungsmittel2×

Reaktionsbedingungen

Temperatur
70 °C

Versuchsvorschrift

A 1000 ml 4-neck laboratory reactor rendered inert using nitrogen and equipped with paddle stirrer, dropping funnel, thermometer, and water separator with reflux condenser is charged with 350 g (2.525 mol) of methyltrimethoxysilane (available commercially from Wacker Chemie AG) in solution in 222.8 g of Isopar E (isoparaffinic hydrocarbon mixture with a boiling range of 113-143° C., available commercially from ExxonMobil). Over the course of 12 minutes, 233.6 g of 50% strength potassium hydroxide solution (0.214 mol KOH) are metered in at 40° C., during which the reaction mixture heats up to reflux (70° C.). It is held at reflux temperature by subsequent heating. The distillate separates out in the water separator as the lower phase, and is continuously taken off and replaced by Isopar E; at the same time, a fine suspension is formed in the reaction flask. Up to a boiling temperature of 118° C., 294.1 g of clear, colorless distillate are collected, which according to analysis by gas chromatography contains 82.4% methanol, 15.7% water, and 1.7% Isopar E. The hydrolysis of the methoxy radicals, accordingly, is quantitative. The suspension is filtered over a Seitz K250 filter plate in a suction filter, and nitrogen is passed through to constant weight. This gives 278.5 g of a very fine, white, free-flowing powder, with a solids content of 99.8% (determined using the HR73 Halogen Moisture Analyzer solids content balance from Mettler Toledo at 160° C.)

Aufarbeitung

  1. customA 1000 ml 4-neck laboratory reactor rendered inert using
  2. customnitrogen and equipped with paddle stirrer
  3. temperaturewith reflux condenser
  4. customare metered in at 40° C., during which
  5. temperatureat reflux temperature by subsequent heating
  6. customat the same time, a fine suspension is formed in the reaction flask
  7. distillationUp to a boiling temperature of 118° C., 294.1 g of clear, colorless distillate are collected
  8. customThe hydrolysis of the methoxy radicals
  9. filtrationThe suspension is filtered over a Seitz
  10. filtrationK250 filter plate in a suction
  11. filtrationfilter
  12. customat 160° C.

Quellen und Nachweise

ORD-Eintrag
ord-d13be5b8b9c446ebad33fb8adc4ca97c
Quelldatensatz
uspto-grants-2015_02
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08961672B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion